.png)
- Out-of-Stock
Grove Triple Color E-Ink Display - module with 3-color e-Paper 1.54" 152x152
ID: 583162
5906623416394
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 104020129
Description
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 1.54 "and a resolution of 152x152 px. It has the ability to display content with a two-level gray scale. Built-in STM32 microcontroller performs communication via UART interface. E-Paper displays are characterized by high contrast of the displayed image and consume power only when the displayed content is changed. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. Full documentation of the module with examples of use is available on the product page.
Features
- Diagonal: 1.54"
- Resolution: 152x152 px
- Display color: red, black, white
- Gray levels: 2
- Interface: UART (baudrate 230400)
- Pixel size: 0.181 × 0.181
- Viewing angle:> 170 °
- No backlight, display the last content after power off
- Low energy consumption
- Supply voltage: 3.3 V or 5 V
- Working temperature: 0 to 40 ℃
- Working humidity: 40 to 70% RH
- Dimensions: 43 x 43 mm
583162
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 1,54
- Resolution
- 152 x 152 px
- Interface
- UART
- Touch
- No
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.90
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 156
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 18
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 2
Available
Other products in the same category (16)
No product available!
Development board with 8-core SoC chip Samsung Cortex-A53 Octa Core S5P6818 1.4GHz with built-in Ethernet, HDMI, camera interface and LCD display. The board includes a USB port, a serial port and a 40-pin GPIO connector. FriendlyELEC NanoPi Fire3
Retired
No product available!
NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 256MB RAM
Retired
No product available!
NanoPi NEO Core2, Allwinner H5 Quad-Core 1.5Ghz + 1GB RAM + 8GB eMMC, without soldered GPIO pins
Retired
No product available!
NanoPi NEO Core is a small PCB equipped with the SoC Allwinner H3 chip and 512MB RAM. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C, I2S interface. The board can be powered from the Micro USB connector. FriendlyELEC NanoPi NEO Core
Retired
No product available!
NanoPi NEO Plus 2 single board computer (SoC) with Allwinner H5 processor Quad-Core 1GHz + 1GB RAM + 8GB eMMC, SoC (ARM Cortex A-53)
Retired
No product available!
A small minicomputer with the SoC Allwinner H5 quad-core system (ARM Cortex-A53). The system has a built-in 16-core Mali450 graphics coprocessor. The computer is equipped with 512 MB DDR3 RAM. There are images of UbuntuCore and Armbian systems available for the computer. NanoPi NEO2
Retired
No product available!
NanoPi Duo is a small PCB equipped with the SoC Allwinner H2+ system, RAM memory with a capacity of 256 MB and a built-in Wi-Fi module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. The set is perfect for light IoT applications
Retired
No product available!
NanoPi Duo is a small PCB equipped with the SoC Allwinner H2 system, RAM memory with a capacity of 512MB and a built-in Wi-Fi module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. The set is perfect for light IoT applications
Retired
No product available!
Alphanumeric OLED 2x16 display, with built-in WS0010 controller, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH001602AB
Retired
No product available!
Alphanumeric display OLED 16 characters x 2 lines, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH001602AR
Retired
No product available!
Atlas-SoC Kit starter kit with the System-on-Chip system from the Cyclone V SoC family, in which, among others, dual core ARM Cortex-A9 processor (with a frequency of 925 MHz) and a large FPGA matrix (40,000 logic elements). Terasic P0419
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 104020129