- Out-of-Stock
ArduCAM 8MP Synchronized Stereo Camera Bundle Kit - set with two IMX219 cameras for Raspberry Pi
ID: 586895
A set with two IMX219 cameras with a resolution of 8 MP and an expansion module for the Raspberry Pi, which allows you to connect two cameras simultaneously. ArduCAM B0350
Description
A set with two IMX219 cameras with a resolution of 8 MP and an expansion module for the Raspberry Pi, which allows you to simultaneously connect two cameras to the minicomputer. The sensor used has a matrix with a resolution of 8 MP and a viewing angle of 220 ° and is attached to the evaluation kit through a dedicated socket and FPC cable, and uses the MIPI-CSI interface specially designed to work with cameras. The expansion module allows you to connect two cameras via MIPI connectors to one MIPI connector of a minicomputer. Utilizes ISP hardware features for better performance, plus auto exposure, auto white balance and shading correction. It will be used in the case of projects using stereo vision, 360 cameras or advanced surveillance systems. Documentation of the camera configuration is available for the set.
Features
- ArduCAM Camarray HAT
- Compatible with all versions of Raspberry Pi with MIPI connector (Raspberry Pi 4 model B, Raspberry Pi 3 model B +, Raspberry Pi 3 model B etc.)
- Two MIPI camera inputs and one MIPI output
- Support for 1/2 line MIPI camera inputs up to 1 Gb / s
- Supports 2-band MIPI output up to 1 Gb / s
- Supports RAW8 / RAW10 / RAW12 format
- Support for standard V4L2 platform, video nodes and controls
- Support for Arducam RPI cameras up to 16MP thanks to dedicated full-resolution camera driver
- Support for linking cameras side by side, switching channels 0 and 1 on the fly
- Dimensions: 65 x 56 mm
- IMX219 camera
- Pixel size: 1.12 μm x 1.12 μm
- Resolution: 6528Hx2464V 8MP
- Optical Size: 1/4 "
- Output interface: 2-lane MIPI CSI-2
- Output formats: RAW10
- Frame rate: 1600 × 600 @ 21fps, 2560 × 720 @ 37fps, 3840 × 1080 @ 17fps, 5184 × 1944 @ 8fps, 6528 × 1848 @ 7fps, 6528 × 2464 @ 5fps
- IR filter
- Dimensions: 25 x 24 mm
- Lens
- Effective focal length: 0.76 mm
- Field of view: 220 °
- Aperture: F2.1
- Mounting: M12
Kit contains
- 2 x 8MP IMX219 camera module with lens
- ArduCAM Camarray HAT expansion module
- FPC 15-pin to 22-pin 150 mm adapter
- 2 x FPC 15-pin to 22-pin 73 mm adapter
- 4 x Spacer M2.5x11mm
- 4 x M2.5 nut
- 4 x M2.5 x 6mm screw
586895
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- Yes
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł257.89
24h
Available quantity: 56
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 5
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 8
Available
A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Raspberry Pi, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265R
zł1,520.59
Delivery date unknown
No product available!
Module with IMX298 sensor that works with all versions of the Raspberry Pi. The sensor used has a 16 MP matrix and allows video recording at resolutions 4640x3472/10fps. ArduCAM B0323
zł395.69
24h
Available quantity: 2
Available
The module with the IMX230 sensor, working with all versions of the Raspberry Pi. The sensor used has a matrix of 21 MP and allows you to record video at resolutions of 5344x4012/9fps. ArduCAM B0324
zł418.97
24h
Available quantity: 1
Available
Other products in the same category (16)
eMMC Flash memory module for Hardkernel Odroid N2L computers. 128GB capacity, installed Android operating system. The set includes a microSD adapter. Hardkernel 128GB eMMC Module N2L Android
Retired
No product available!
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It works with speakers with an impedance of 4 to 8 Ω and offers power up to 50 W
Retired
No product available!
SpaceSOM series module with NXP i.MX8M plus 1.8 GHz processor (4 Cortex-A53 + Cortex-M7 cores), 2 GB RAM and 8 GB eMMC memory. SomLabs SLS35X8MPQC_1800C_02GR_08GE_0SF_C
Retired
No product available!
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
Retired
No product available!
USB-TTL converter with USB type A, micro USB and USB type C connectors. Enables communication between the UART serial interface and the USB interface. SB Components 24780
Retired
No product available!
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)
Retired
No product available!
LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653
Retired
No product available!
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Candy
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Flower
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Frozen
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Jungle
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Moon
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Pacific
Retired
No product available!
Filament from ROSA3D made of high-quality ABS pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill ABS+ Black
Retired
No product available!
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Black
Retired
No product available!
A set with two IMX219 cameras with a resolution of 8 MP and an expansion module for the Raspberry Pi, which allows you to connect two cameras simultaneously. ArduCAM B0350