ZL16AVR

Cables for evaluation boards, set of 10 pcs., blue colour

Cables for evaluation boards, set of 10 pcs., red colour

Cables for evaluation boards, set of 10 pcs., green colour

LCD character display 2x16, 1x16 pin header for evaluation boards

USB A/B cable (1.8m)

USBRS232 interface with galvanic isolation

8-bit Bidirectional Voltage Converter

SD/MMC Module with Voltage Level Translator

Module with digital thermal sensor, thermostat and I2C interface

A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30

A 30 cm long connecting cable (6 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF06S connector that KAmod modules are equipped with. cabhu06-30

IDC10 IDC10 Adapter/Splitter

8-position DIP-Switch Module

Programmable RGB and RGBA LED driver

Module with 8 LEDs

Cables for evaluation boards, set of 10 pcs., yellow colour

Cables for evaluation boards, set of 10 pcs., white colour

Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)

ATATMEL-ICE-BASIC is a programmer designed to work with AVR microcontrollers with the On-Chip Debug function and microcontrollers with the ARM Cortex-M core from Atmel. Available interfaces are JTAG, SWD, PDI, TPI, aWire, SPI and debugWire.

The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541

RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01

Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch

Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611

Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication

The DS3231 RTC module for Raspberry Pi is a high-precision, battery-powered, I2C-communicating real-time clock that provides accurate timekeeping thanks to temperature compensation and a quartz resonator