New products
New products New products
zł119.00
Delivery date unknown
zł119.00
Delivery date unknown
PiRacer Pro AI Kit accessory set for building robot with Raspberry Pi 4 - Waveshare 18490
ID: 584578
5906623439553
zł858.07
Tax included
zł697.62 tax excl.
A set of accessories for building an autonomous racing robot based on the popular Raspberry Pi 4 model B development kit. Waveshare PiRacer Pro AI Kit Acce
Description
A set of accessories for building an autonomous racing robot based on the popular Raspberry Pi 4 model B development kit. The set consists of a racing chassis, an 5MP camera with a OV5647 sensor and the necessary accessories.
Attention!
The kit does not include the Raspberry Pi 4 model B kit and the micro SD card. They must be purchased separately. Only 18650 batteries shorter than 67 mm are compatible with the set.
The chassis is a structure based on the Ackerman principle with the RC380 drive motor with a speed of 15,000 rpm and the front steering axle with an E6001 servo. The chassis has a heavy-duty metal gear and a double differential lock. The chassis skeleton is made of high-quality carbon fiber and placed on four shock absorbers that stabilize while driving on demanding terrain.
The robot expansion board includes the motor controller, OLED display, battery charging and monitoring circuit, and a case for 4 18650 battery cells.
The set can be used to build a racing vehicle controlled by the included gamepad, computer or mobile device. It can also be an excellent driving base for creating an autonomous vehicle. The set has a very rich support in the form of tools such as TensorFlow, OpenCV, Keras as well as DonkeyCar, a platform that uses neural networks and deep learning mechanisms, which with the support of Keras, TensorFlow and OpenCV allows you to build your own autonomous vehicle.
Full documentation are available on the product Wiki page.
Features
- Compatible with Raspberry Pi 4 model B
- Raspberry Pi OS (Raspbian) operating system
- Programming language: Python
- 5MP camera, 160° FOV wide angle
- 0.91" 128 x 32 pixel OLED display
- 2.4 GHz/5 GHz WiFi, Bluetooth 5.0
- Controls: gamepad, web browser
- Overcharge/discharge protection, overcurrent protection, short circuit protection, reverse polarity protection
- Chassis type: steered according to the Ackerman principle, b Front and rear axle differential lock
- Power supply: 8.4 V, 4 x 18650 battery (two cells in parallel, two in series)
- RC380 brush motor with a speed of 15,000 rpm
- E6001 servo, 6 kg/cm
- High-quality carbon fiber chassis, wear-resistant and impact-resistant
- Front bumper
- Software libraries: DonkeyCar
Kit contains
- Chassis
- PiRacer Pro expansion board
- RPi camera
- Acrylic mounting plate for the camera
- Camera holder
- Wireless gamepad
- 6-pin cable
- MicroSD card reader
- Wrench
- 2 x Screwdriver
- 8.4V charger + EU adapter
- Screw package
- Test route
584578
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Micro SD 32GB class 10 card with Linux Raspberry Pi OS for RPi (old Raspbian)
zł39.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
24h
Available quantity: 64
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 38
Available
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 2500 mAh. Samsung INR18650-25R
zł23.99
24h
Available quantity: 27
Available
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3000 mAh. Samsung INR18650-30Q
zł33.60
24h
Available quantity: 39
Available
Other products in the same category (16)
The controller is designed for the Pololu 3pi+ 32U4 robot. It was based on the AVR ATmega32U4 microcontroller with the Arduino bootloader loaded. Version for use with OLED display. Pololu 4973
zł336.86
24h
Available quantity: 1
Available
A 5 DoF robotic arm built with servos and ESP32. It can be controlled wirelessly via WiFi and web browser or USB interface. Waveshare RoArm-M1 (EU)
zł1,504.20
24h
Available quantity: 1
Available
Available
Minisumo robot on a tracked chassis with Pololu motors with a 75:1 HP gearbox. The robot is fully assembled and requires four additional AA batteries. Pololu 5012
zł821.55
4 weeks
No product available!
The MiniQ 2WD Robot Kit v2.0 chassis has a built-in driver compatible with the Arduino Leonardo plate. The chassis has been equipped with reflective sensors, a compass and obstacle sensors. Thanks to them, it is possible to create a robot following a line (linefollower) or controlled by an IR remote (which is included in the set). DFRobot ROB0081
zł427.22
24h
Available quantity: 1
Available
A set of accessories for building an autonomous racing robot based on the popular Raspberry Pi 4 model B development kit. Waveshare PiRacer AI Kit Acce
zł672.26
4 weeks
No product available!
A set for building a mobile robot with Mecanum chassis based on Raspberry Pi. Equipped with Raspberry Pi Build HAT expansion module and 5 MP camera. Waveshare BuildMecar-Kit-B
zł428.51
4 weeks
No product available!
A set of accessories for building a four-legged walking robot based on the popular Raspberry Pi 4 minicomputer. Waveshare PIPPY-ACCE
zł612.37
4 weeks
No product available!
Electronic worm in the form of a kit for self-assembly. It is powered by a DC motor and powered by a set of two AA batteries
zł12.28
24h
Available quantity: 1
Available
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
zł137.45
4 weeks
No product available!
The plow is intended for use with the Zumo 32U4 robot. The plow is made of thick, laser cut stainless steel and is supplied with a plastic handle for the sensor plate. Pololu 3121
zł33.54
4 weeks
No product available!
A modernized version of the popular Pololu 3pi mobile robot. The robot was based on the AVR ATmega32U4 microcontroller with the Arduino bootloader. Assembled version. Pololu 3738
zł1,101.00
4 weeks
No product available!
Electronic ball launcher in the form of a kit for self-assembly. The device is powered by two AA batteries
zł14.54
24h
Available quantity: 33
Available
Available
Educational robot for learning programming based on the micro:bit module. Equipped with a red protective case. DFRobot ROB0148-EN-LR
zł227.23
24h
Available quantity: 1
Available
Accessory kit for building an autonomous racing robot based on the NVIDIA Jetson Nano. Waveshare JetRacer AI Kit A
zł3,099.00
4 weeks
No product available!
A set of accessories for building an autonomous racing robot based on the popular Raspberry Pi 4 model B development kit. Waveshare PiRacer Pro AI Kit Acce