![Main view Main view](https://kamami.pl/66051-large_default/pololu-1056---power-hd-standard-servo-6001hb.jpg)
![Main view Main view](https://kamami.pl/66051-large_default/pololu-1056---power-hd-standard-servo-6001hb.jpg)
zł70.94 tax excl.
Standard analog servo equipped with a plastic gear. It is characterized by high durability and strength. Pololu 1056
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. A standard PWM modeling signal with a pulse range from 1000 to 2000 µs is used for control, which gives a range of movement of about 180°. The recommended operating voltage is 6 V and with this voltage the servo has a speed of 0.14 s/60° and a torque of 6.7 kg*cm. The servo shaft is based on two sleeve bearings, which significantly reduces friction. The cable is approximately 30 cm long and is terminated with a standard JR-style connector. The set with the servo includes a set of drag rings and mounting screws.
Data sheet
Servo Extension Cable 6" Female - Female
No product available!
Servo Extension Cable 12" Female - Female
Servo Extension Cable 24" Female - Female
No product available!
The servo driver module is an extension intended for minicomputers Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +. Allows you to control 16 PWM channels. Waveshare 15275
No product available!
Programmable standard 17kg * cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare SC15 Servo
Programmable standard 30 kg*cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3215 Servo
Standard 40 kg*cm programmable servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3025 Servo
No product available!
No product available!
Standard 20 kg*cm programmable servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3215-HS Servo Motor
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. DS3230
Waterproof servo with metal gearbox and aluminum housing. A standard PWM modeling signal is used for control. It offers torque up to 35 kg*cm. DFRobot SER0060
The Base Rotate Kit is perfect for rotating a large mass. It can easily support 10lbs of weight. It has five 6mm bearings to reduce the friction. It\'s injection molded from ultra strong ABS plastic. ROB0034
No product available!
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. SPT5435
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441
No product available!
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. DS3225
The FS5115M is a standard-size analog servo from FEETECH that has an all-metal gear train and delivers extra-high torque normally associated with much more expensive or larger servos. Servo horns and associated hardware are included. Pololu 3426
No product available!
Servomechanism SG5010, double-bearing, TowerPro, RoHS
SpringRC SM-S4303R Continuous Rotation Servo
Standard analog servo equipped with a plastic gear. Adapted to continuous operation 360°. Pololu 3448
No product available!
Standard 25 kg*cm programmable servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3020 Servo
Standard analog servo equipped with a plastic gear. It is characterized by high durability and strength. Pololu 1056