- New
SEQURE SQESC 2670 - ESC controller 2-6S 70A (ESCape32) + BEC
ID: 1205237
5902186337640
zł212.18
Tax included
zł172.50 tax excl.
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>
Description
SEQURE SQESC 2670 is an advanced brushless motor ESC designed for a wide range of RC applications, including FPV drones, multirotors, RC airplanes, boats, and off-road vehicles. The device is powered by an efficient 32-bit STM32G071 processor running at up to 64 MHz, ensuring very fast and precise motor control. Support for PWM frequencies up to 128 kHz enables smooth, responsive operation and high drive efficiency. The use of high-current MOSFET transistors and a metal heatsink allows for effective heat dissipation.
SEQURE SQESC 2670 offers broad compatibility thanks to support for DShot (all variants), PWM, Oneshot, and Multishot protocols, enabling cooperation with most flight controllers. Automatic throttle signal detection at startup simplifies configuration and speeds up setup. The built-in protection system, including low voltage, overheating, motor stall, and overcurrent protection, enhances operational safety and protects components. A major advantage is the integrated adjustable BEC, offering output voltages of 5V, 6V, 7.2V, 8.2V, and 12V, allowing direct powering of receivers, servos, and other onboard devices.
Advanced configuration options are available via a visual programming tool, enabling adjustment of parameters such as motor timing, throttle calibration, rotation direction, and response characteristics. Additionally, the device features programmable RGB LED lighting, allowing for visual customization. Thanks to its versatility and high performance, SEQURE SQESC 2670 is an excellent choice for demanding users looking for a reliable ESC for various RC applications.
Features
- Processor: STM32G071
- Input voltage: DC 7V to 25.2V (2 to 6S LiPo)
- Continuous current (with proper cooling): 70A
- Peak current (with proper cooling): 110A
- Supported firmware: ESCape32
- Supported protocols: DShot (All), PWM, Oneshot, Multishot, etc.
- Programmable parameters
- Throttle calibration
- Timing adjustment
- Current sensing
- Telemetry signal
- Motor rotation direction settings
- RGB LED lighting
- BEC: 5V/4A, 6V/4A, 7.2V/4A, 8.2V/4A, 12V/3A (adjustable)
- Dimensions: 190 × 18 × 11 mm
- Weight: 22 g
1205237
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 940W and a current of up to 37.3A, allowing for aggressive flights while maintaining reliability. SEQURE S2207 BLDC 6S 1850KV
zł92.83
24h
Available quantity: 3
Available
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 1134W and a current of up to 45A, allowing for aggressive flights while maintaining reliability. SEQURE S2207
zł93.53
24h
Available quantity: 3
Available
Other products in the same category (16)
A speed controller based on the open VESC standard, designed for electric skateboards, scooters, and e-bikes. It supports voltages from 14 to 75 V and continuous currents up to 100 A, offering various BLDC motor control modes, and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design and extensive security features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100
zł531.68
4 weeks
No product available!
This speed controller is designed for high voltage and high current applications, ideal for electric vehicles, e-foils, and robotics. It supports voltages up to 84 V and continuous currents up to 200 A. Its ARM Cortex-M4 STM32F405RG processor ensures precise control and fast signal processing. It supports various control modes, works with BLDC and DC motors in both sensored and sensorless versions, and is configured via USB or Bluetooth using the VESC Tool. Makerbase VESC 75200 V2
zł776.23
4 weeks
No product available!
An advanced speed controller designed to power three-phase brushless motors in a variety of applications such as electric scooters, electric skateboards and electric bicycles. It supports an input voltage range of 8 V to 60 V, which corresponds to 3S to 13S for LiPo batteries, and a maximum current of up to 50 A. Makerbase VESC MINI 6.7 Pro
zł430.32
24h
Available quantity: 4
Available
2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel
zł45.02
24h
Available quantity: 1
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 15 A per channel
zł96.96
24h
Available quantity: 4
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 3 A per channel
zł53.53
4 weeks
No product available!
ESC controller module for a brushless motor with a current capacity of up to 40 A. It can work with LiPo packages from 3S to 6S. Uses BLHeli_32 software. Skystars Talon32
zł78.14
24h
Available quantity: 3
Available
ESC controller module for a brushless motor with a current capacity of up to 120 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł538.99
24h
Available quantity: 1
Available
ESC controller module for a brushless motor with a current capacity of up to 80 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł445.74
4 weeks
No product available!
Programming module for AM32 and BLS32 series ESC controllers. It allows you to easily update the controller software via the USB Type-C connector. RhinoESC Crawler
zł30.57
4 weeks
No product available!
The 7A 1-2S BLheli_S XSD7A Miniature Brushless Motor ESC Controller is a compact, high-performance device ideal for controlling brushless motors in small projects. Thanks to its low weight and solid power, it is suitable for drones, RC models and other applications requiring precise motor control.
zł65.58
4 weeks
No product available!
A compact and powerful ESC speed controller designed for RC models and FPV racing, supporting 4S–8S LiPo batteries and a constant current of 60 A (instantaneous up to 70 A). With a 20x20 mm mounting standard, it ensures durability, reliability and easy integration even in limited space. The use of AM32 software and variable PWM frequency guarantees high precision and smooth operation of the motors in all conditions. F60A mini
zł660.71
24h
Available quantity: 1
Available
A speed controller based on the open VESC standard, designed for skateboards, scooters, and e-bikes. It supports voltages from 14 to 84 V (4S–20S) and continuous currents up to 100 A, offering various BLDC motor control modes and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design, aluminum PCB, and extensive safety features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100 V2
zł578.62
4 weeks
No product available!
A compact and powerful ESC module for BLDC and PMSM motors, ideal for racing drones and lightweight aircraft. Featuring an STM32F303 microcontroller with sensorless FOC and advanced 3-shunt current measurement, it delivers smooth operation and high efficiency. It supports 3S–6S LiPo power, currents up to 20A RMS, and PWM, UART, CAN, and I²C communication for easy integration with flight controllers. STMicroelectronics STEVAL-ESC001V1
zł153.06
1 weeks
No product available!
A compact ESC module designed for BLDC motors, ideal for drones and mobile devices. Equipped with the STSPIN32F0A chip and ultra-low RDS(on) transistors, it provides efficient operation and currents up to 20A. It supports 2S–6S LiPo batteries and offers precise sensorless control thanks to BEMF detection. STMicroelectronics STEVAL-ESC002V1
zł152.72
24h
Available quantity: 2
Available
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32
zł159.14
24h
Available quantity: 3
Available
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>