![Main view Main view](https://kamami.pl/83590-large_default/stemma-qt-ads7830-8-channel-8-bit-adc-module-with-8-channel-adc-converter.jpg)
![Main view Main view](https://kamami.pl/83590-large_default/stemma-qt-ads7830-8-channel-8-bit-adc-module-with-8-channel-adc-converter.jpg)
zł26.87 tax excl.
Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The ADS7830 ADC converter module is a system that offers precise conversion of analog signals into digital ones. The 8-bit resolution enables accurate reading of signal values, and the sampling rate of up to 70 ksps guarantees fast and efficient data processing. The converter has 8 input channels, allowing you to monitor various signals simultaneously. Thanks to the SAR (Successive Approximation Register) architecture, the module provides stable and precise measurement results. The ADS7830 converter provides good signal-to-noise quality, which is important in applications requiring precise measurement.
Thanks to the STEMMA QT/Qwiic connector and I2C interface, the module is easy to integrate with various microcontroller platforms. Additionally, the presence of two address pins allows support for up to four converters on one bus, which increases the possibilities of expanding the system. The module's power supply of up to 5.25 V makes it compatible with various voltage sources, which increases its versatility. The manufacturer provides the easy-to-use Adafruit library, which allows you to use the converter not only for traditional voltage measurements, but also in differential mode.
This ADC converter, thanks to its advanced features, is an excellent choice for electronic, measurement and sensor projects where precision and speed of signal processing are crucial. The STEMMA QT/Qwiic connector also facilitates integration with other modules and microcontrollers, making it a versatile component for a variety of applications.
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
4-core cable with a length of 300 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5384
4-core cable with a length of 400 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5385
Module with an ISO1540 bidirectional galvanic isolator. It allows to electrically separate two devices communicating via the I2C interface. Adafruit 4903
No product available!
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP. Communication via I2C or SPI. Adafruit 4554
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
Module with 12-channel MPR121 capacitive touch sensor. The board is equipped with a Stemma QT connector and communicates via the I2C interface. Adafruit 4830
The module with a black and white OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. Equipped with a STEMMA QT connector, communicates via the I2C interface. Adafruit 4440
The module allows you to connect 4 arcade buttons with LED backlight. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5296
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
Module with a logarithmic digital potentiometer based on the DS1841 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4570
Module with light intensity sensor LTR-303. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5610
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
Module with 4-channel 12-bit DAC MCP4728 converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 4470
Module with 3-axis ADXL375 accelerometer with a wide measurement range up to ±200g. The board is equipped with a STEMMA QT connector and communicates via the I2C or SPI interface. Adafruit 5374
LPS35HW waterproof barometer module. It can measure pressure from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4258
Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836