STEMMA QT MPR121 12-Key Capacitive Touch Sensor Gator - module with 12-channel touch sensor
ID: 1186904
5906623431847
zł36.97
Tax included
zł30.06 tax excl.
Module with 12-channel MPR121 capacitive touch sensor. The board is equipped with a Stemma QT connector and communicates via the I2C interface. Adafruit 4830
Description
Module with 12-channel MPR121 capacitive touch sensor. The system combines two functions: capacitance measurement and touch detection. The constant current capacitance detection function measures capacitances from 10 pF to over 2000 pF with a resolution down to 0.01 pF. Once the electrode capacitance data is collected, the sensor determines the touch or release state of the electrode by comparing it to a capacitance baseline value. The module has 12 completely independent electrodes with built-in auto-configuration and an interrupt generating output. For each of the channels, the user can connect a touch probe, e.g. using cables with alligator clips, and create a touch keyboard. The board is equipped with a Stemma QT/Qwiic connector and communicates via the I2C interface. It is powered by 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Internal 10-bit ADC
- Integrated independent autocalibration for each electrode input
- Completely independent electrodes with built-in auto-configuration
- I2C interface, with IRQ interrupt, interrupt output informing about electrode state change
- 12 inputs for electrode and capacitance detection, 8 of which can also drive LEDs
- Autoconfiguration of charging current and charging time for each electrode input
- Separate pick-up and trip thresholds for each electrode, ensuring hysteresis and electrode independence
- Capacitance measurement from 10 pF to over 2000 pF
- Resolution 0.01 pF
- I2C interface
- I2C address: 0x5A (default), configuration jumper
- Voltage level converter
- Supply voltage: 3.3 V or 5 V
- Dimensions: 51 x 25.2 x 4.5mm
1186904
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A set of 10 colored wires with 50 cm long crocodile clips.
zł12.34
24h
Available quantity: 78
Available
Other products in the same category (16)
Hub with Qwiic connectors that allows you to connect several boards to the evaluation kit. There is no built-in control system, but only splits one connector into 3 more. SparkFun BOB-18012
zł10.50
24h
Available quantity: 4
Available
Module with digital barometer BMP390. It enables pressure measurement from 300 to 1250 hPa and temperature from -40℃ to 85℃. Communicates via I2C or SPI. Adafruit 4816
zł56.09
24h
Available quantity: 3
Available
Expansion module (output expander) dedicated to the Circuit Playground Express board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3093
zł166.86
24h
Available quantity: 1
Available
Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097
zł32.32
24h
Available quantity: 1
Available
Module with I2C driver based on the HT16K33 chip. Dedicated to 7-segment displays. It is equipped with STEMMA QT connectors. Adafruit 1271
zł53.95
24h
Available quantity: 2
Available
The module with a black and white OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. Equipped with a STEMMA QT connector, communicates via the I2C interface. Adafruit 4440
zł87.22
24h
Available quantity: 2
Available
Module with 6-axis IMU sensor that allows you to measure acceleration and rotational speed in the range up to ±16g and ±2000dps. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 4503
zł50.04
24h
Available quantity: 5
Available
A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027
zł26.38
24h
Available quantity: 3
Available
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4863
zł52.32
24h
Available quantity: 1
Available
Module with light intensity sensor TSL2591. Equipped with STEMMA QT connector with I2C interface. Adafruit 1980
zł37.43
24h
Available quantity: 3
Available
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP. Communication via I2C or SPI. Adafruit 4554
zł78.45
24h
Available quantity: 9
Available
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
zł38.27
24h
Available quantity: 4
Available
Module with sensor TMP117. It enables measurement in the range from –55°C to 150°C with a very high accuracy up to ± 0.1°C. It communicates via the I2C interface. Adafruit 4821
zł58.89
4 weeks
No product available!
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł79.42
24h
Available quantity: 3
Available
LPS35HW waterproof barometer module. It can measure pressure from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4258
zł73.47
24h
Available quantity: 5
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
24h
Available quantity: 1
Available
Module with 12-channel MPR121 capacitive touch sensor. The board is equipped with a Stemma QT connector and communicates via the I2C interface. Adafruit 4830