zł39.00
Stepper motor NEMA23 - unipolar/bipolar, 200 steps/rev, 4.5V, 2A
ID: 210505
zł412.14
Tax included
zł335.07 tax excl.
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 2 A per coil. Pololu 1475
Description
Stepper motor with a resolution of 200 steps/revolution (1.8° per step). Can be used as unipolar or bipolar motor. It is supplied with the voltage of 4.5 V, while the current consumption is a maximum of 2 A per coil. It has a holding moment of 14 kg-cm. The cord is not terminated with any plug.
Features
- Resolution: 200 steps/rev. (1.8° per step)
- Current consumption per coil: 2 A.
- Rated voltage: 4.5V
- The time kept: 14 kg-cm
- Coil resistance: 2.25 Ω (per coil)
- Winding inductance: 3.6 mH per coil
- Shaft diameter: 6.35 mm
- Shaft type: D
- Dimensions: 56.4 x 76 mm (NEMA 23)
- Cable length: 30 cm
- Weight: 1000 g
210505
Data sheet
- Shaft diameter
- 6,35 mm
- Resolution
- 200 step/rev
- Torque
- 14 kg-cm
- Coil resistance
- 2,25 Ω
- Coil current
- 2 A
- Inductance of the coil
- 3,6 mH
- Voltage
- 4,5 V
- Weight
- 1 kg
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688
zł42.45
24h
Available quantity: 3
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł287.59
24h
Available quantity: 3
Available
Tic T500 USB Multi-Interface Stepper Motor Controller
zł134.39
24h
Available quantity: 2
Available
STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876
zł37.80
24h
Available quantity: 2
Available
STSPIN220 stepper motor driver module with a low voltage range of 1.8...10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2877
zł49.21
24h
Available quantity: 1
Available
Other products in the same category (16)
NEMA17 bipolar stepper motor included with a 300 mm long T8 trapezoidal screw. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.4 V and a current consumption of 1.5 A per coil. 17HD40005-300N
zł172.75
4 weeks
No product available!
NEMA23 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2.5 V and draws a current of 2.8 A per coil. 57BYG56-2804S
zł95.69
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473
zł390.51
4 weeks
No product available!
Hybrid bipolar stepper motor eith integrated 18cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2689
zł492.64
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 4.1 V and draws a current of 0.7 A per coil. 17HS4023
zł43.85
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.3 V, and consumes up to 0.8 A per coil. Pololu 2256
zł251.15
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), has a nominal voltage of 7.4 V, and draws a current of 0.28 A per coil. Pololu 1207
zł163.48
24h
Available quantity: 1
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 5.4 V, and has a current consumption of 1 A per coil. Pololu 2296
zł350.24
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 7.4 V, and has a current consumption of 1 A per coil. Pololu 1472
zł390.51
4 weeks
No product available!
NEMA34 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2.6 V and draws a current of 5 A per coil. 86A8S4-14
zł451.69
4 weeks
No product available!
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
zł534.89
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a voltage rating of 12 V and draws a current of 1.7 A per coil. 42HB34F08AB
zł51.76
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200
zł260.59
24h
Available quantity: 5
Available
NEMA23 bipolar/unipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 36 V and draws a current of 5.6 A per coil. 57HS22
zł190.50
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step) with a double shaft, a rated voltage of 6.3V, and draws a current of 0.3A per coil. Pololu 2294
zł642.32
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 1.8 A per coil. 17HS8401B
zł65.19
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 2 A per coil. Pololu 1475