Main view
search
  • Main view
  • Full set
  • Assembled with connectors
  • Top view
ID: 1204130
5902186336414
zł111.09
Tax included

zł90.32 tax excl.

DC-DC step-up/step-down voltage regulator module that stabilizes the output voltage at 6 V with an input voltage range of 2.9 V – 32 V. The circuit automatically increases or decreases the input voltage, allowing it to power devices even when the supply voltage varies significantly. The regulator can deliver up to 2 A output current (when the input voltage is close to the output voltage) and offers a typical 80–90% efficiency, making it suitable for battery-powered systems and embedded projects. Pololu 2575

24h
Available
Available quantity: 2
Kamami is the official distributor of electronic modules and Pololu robotic parts. All products of this brand in our offer are original and come directly from the manufacturer.

Description

The Pololu S18V20F6 module is a DC-DC switching regulator of the step-up/step-down (buck-boost) type that can both raise and lower the input voltage while maintaining a stable 6 V output. The circuit operates over a wide input voltage range of 2.9 V – 32 V (30 V recommended maximum), making it suitable for battery-powered applications or systems with fluctuating supply voltages. The SEPIC (Single-Ended Primary Inductor Converter) topology enables voltage regulation regardless of whether the input voltage is higher or lower than the output voltage. The typical maximum output current is about 2 A, while efficiency in most applications ranges between 80% and 90%, helping reduce power loss and heat generation.

                p1204130-0J5043.1200.png          p1204130-0J9962.1200%20%281%29.png

The module includes an ENABLE pin that allows the regulator to be placed in a low-power state. In sleep mode, the quiescent current can be reduced to tens of microamps depending on the input voltage. The regulator also features reverse-voltage protection, over-current protection, thermal shutdown (approx. 165 °C), and under-voltage lockout for improved reliability and safety. The PCB supports several connection methods: 5 mm screw terminal blocks, 2.54 mm header pins for prototyping boards or breadboards, or direct wire soldering. The board also includes four M2 mounting holes for secure installation inside devices.

                                                                                  p1204130-0J5037.1200.jpg

Features

  • Converter type: step-up / step-down (buck-boost, SEPIC)
  • Input voltage: 2.9 V – 32 V
  • Recommended maximum operating voltage: 30 V
  • Output voltage: 6 V (fixed)
  • Output voltage accuracy: ±4%
  • Maximum output current: up to 2 A (depending on input voltage)
  • Efficiency: 80–90% (typical)
  • No-load quiescent current: approx. 1 mA
  • ENABLE pin for low-power mode
  • Reverse polarity protection
  • Over-current protection
  • Thermal protection
  • Under-voltage protection
  • Mounting holes: 4 × M2
  • Supports 2.54 mm header pins or 5 mm terminal blocks
  • Module dimensions: 43 × 21 × 10 mm
  • Weight: 7.5 g

Kit includes

  • Pololu S18V20F6 voltage regulator module
  • 2.54 mm header pin strip
  • 5 mm terminal block connectors
1204130

Data sheet

Output voltage
6.0V
Output current
2A
Converter type
Step-down/step-up
Supply voltage min
2,9 V
Supply voltages max
32 V

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Other products in the same category (16)