DC-DC Step-Up converter module 7.5V 4A U3V40F7
ID: 588695
5906623413171
zł44.74
Tax included
zł36.37 tax excl.
DC-DC Step-Up converter U3V40F7 with an output voltage of 7.5 V, an input voltage of 1.3 to 7.5 V and a maximum output current of 4 A. Pololu 4014
Description
The U3V40F7 DC-DC Step-Up converter module with an output voltage of 7.5 V and an input voltage from 1.3 to 7.5 V. The maximum instantaneous load of the module is 9.5 A, however, with prolonged use, the current above 4 A may activate the thermal protection. The converter achieves standard efficiency above 90-95% with similar values of the input and output voltage. The module has protection against overheating and too high voltage.
Pinout
- VIN - power input (1.3-7.5 V)
- GND - ground
- VOUT - exit
- EN - converter is turned on by default (30 kΩ pull-up resistor on the board connects EN pin with VIN). The ENABLE pin can be set low (below 0.4V) to turn off the power and put the board into a low-power state.
Features
- Input voltage: from 1.3 to 7.5 V (the moment of switching on requires a voltage of at least 2.7 V)
- Output voltage: 7.5V
- Type. maximum current: 9.5 A (momentary), 4.5 A (for a few seconds), 4 A (continuous current)
- Built-in protection against overheating, over voltage
- Type. efficiency: 90-95%
- The possibility of mounting goldpins
- Dimensions: 15.2 x 15.2 x 5.6 mm
- Weight: 1.5 g
Regulator parameters
Kit contains
- U3V40F7 converter module
- Straight 6-pin goldpin connector
- 6-pin angled goldpin connector
588695
Data sheet
- Output voltage
- 7,5 V
- Output current
- 4A
- Converter type
- Step-up
- Supply voltage min
- 1,3 V
- Supply voltages max
- 7,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The 6-55V 200W Step-Up Converter Module is a device that converts a DC input voltage (6-35V) to a higher DC output voltage (6-55V) with a maximum input power of 200W, a maximum input current of 10A and a maximum output current of 7A. It offers a high conversion efficiency of up to 97.6% and it is recommended to keep a margin when operating for long periods to avoid overheating.
zł21.23
24h
Available quantity: 2
Available
XL6009E1 Step-Up converter with an output voltage of 1.23 to 30 V, an input voltage of 4 to 35 V and a maximum current of up to 3 A
zł6.95
24h
Available quantity: 158
Available
DC-AC converter, also referred to as an inverter. Converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V
zł8.31
24h
Available quantity: 2
Available
Pololu Adjustable 4-12V Step-Up Voltage Regulator U3V50ALV
zł110.21
4 weeks
No product available!
150 W Step-Up converter with an output voltage of 15to 35 V, an input voltage of 10 to 32 V and a maximum current of up to 6 A
zł12.92
24h
Available quantity: 37
Available
The Step-Up Buck Voltage Regulator module with output voltage of 3.3V and input voltage range of 1-3V and a maximum output current of 200 mA. SparkFun PRT-10967
zł25.94
3 weeks
No product available!
MT3608 is a compact, efficient step-up voltage converter in a SOT23-6 package, offered in a set of 5 pieces. It allows input voltage conversion from 2 V to 24 V into an output voltage of up to 28 V, with a maximum output current of 2 A.
zł8.67
24h
Available quantity: 41
Available
The Step-Up converter module converts the voltage in the range of 3-35V to 5-40V with a power of 40-60W and an efficiency of over 90%. Works stably at temperatures from -40 to 85°C.
zł8.35
4 weeks
No product available!
DC-DC Step-up converter module based on the U3V70F12 system. Input voltage 2.9-12V, output voltage 12V, maximum current 10A. Two mounting holes. Pololu 2895
zł85.20
24h
Available quantity: 2
Available
A cable with a built-in converter that increases the voltage from the USB connector to 12 V. It is equipped with a DC Jack 2.1 x 5.5 mm plug
zł5.69
24h
Available quantity: 42
Available
Module with a step-up converter with an input voltage from 10 V to 32 V and an adjustable output voltage from 15 V to 32 V. It has a maximum power of 150 W
zł44.72
4 weeks
No product available!
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 5 V and a maximum input of up to 2 A. Pololu 4941
zł25.10
24h
Available quantity: 4
Available
The Step-Up converter module with a power of 65W converts the voltage in the range of 3-35V to 3.5-35V with an efficiency of over 96%. Equipped with a voltmeter, it operates in temperatures from -40°C to 85°C.
zł21.13
24h
Available quantity: 2
Available
The Step-UpU1V11A Buck Voltage Regulator module with adjustable output voltage 2-5.25V, input voltage range of 0.5-5.5V and a maximum output current of 1.2A. Pololu 2560
zł40.16
24h
Available quantity: 2
Available
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 3.3 V and a maximum input of up to 2 A. Pololu 4940
zł25.10
24h
Available quantity: 5
Available
A switching converter that stabilizes a 15V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5586
zł14.17
24h
Available quantity: 5
Available
DC-DC Step-Up converter U3V40F7 with an output voltage of 7.5 V, an input voltage of 1.3 to 7.5 V and a maximum output current of 4 A. Pololu 4014