![Main view Main view](https://kamami.pl/69994-large_default/module-with-a-touch-button.jpg)
![Main view Main view](https://kamami.pl/69994-large_default/module-with-a-touch-button.jpg)
zł7.25 tax excl.
The module with a touch button can be used as a replacement for traditional mechanical buttons. It is based on the TTP223 chip, which measures the capacity of the field on the module
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A module with a touch button used as a replacement for traditional mechanical buttons. It is based on the TTP223 chip, which measures the capacity of the field on the module. When a change in capacity is detected (when your finger touches the module or is close enough), the sensor output will be high. The sensor will also function when covered with a non-metallic surface such as plastic or glass, which can be useful in projects that need to be waterproof.
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
Touch button with red LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano. SB Components 21482
The module with the CY8C4014LQI touch sensor in the form of two buttons and a 5-segment slider. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020552
No product available!
Conductivity Sensor Switch DFRobot is a touch button that allows you to change the sensor output status by connecting terminals (positive and negative) using metal, human body or fruit and plants. It is powered by 3.3 ... 5 V. DFRobot SEN0223
No product available!
Module with a capacitive touch sensor based on the CAP1203 chip. There are three touch panels on the board that can be used as separate sensors (pins CS1, CS2, CS3) or as a touch slider. I2C communication. SparkFun SEN-15344
Gravity: Digital Capacitive Touch Sensor is a capacitive touch sensor powered by 3.3V ... 5V voltage. DFRobot DFR0030
Adafruit 2340
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
Module with 12-channel MPR121 capacitive touch sensor. The board is equipped with a Stemma QT connector and communicates via the I2C interface. Adafruit 4830
Expansion module with touch buttons for the FRDM-KE16Z starter kit. NXP FRDM-TOUCH
Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.
The modules are used to operate 7 touch fields. This is possible thanks to the built-in AT42QT1070 capacitive touch sensor. The derived I2C interface serves for communication.
Touch button with green LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
Touch button with blue LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
The module with a touch button can be used as a replacement for traditional mechanical buttons. It is based on the TTP223 chip, which measures the capacity of the field on the module