![Touch button with LED backlight (green) Touch button with LED backlight (green)](https://kamami.pl/38696-large_default/touch-button-with-led-backlight-green.jpg)
![Touch button with LED backlight (green) Touch button with LED backlight (green)](https://kamami.pl/38696-large_default/touch-button-with-led-backlight-green.jpg)
zł5.14 tax excl.
Touch button with green LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Touch button with green LED backlight. By touching the button, the output status changes and the backlight is activated. The module is powered with the voltage from 2.7 V to 6 V and works with 3.3 V systems. The button can be used as a replacement for traditional mechanical buttons. It works on the basis of a circuit that measures the capacitance of the metal field on the module. When a change in capacity is detected (when your finger touches the module or is close enough), the sensor output will show a state change.
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Cables for evaluation boards, set of 10 pcs., green colour
Cables for evaluation boards, set of 10 pcs., yellow colour
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
Touch button with red LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
Touch button with blue LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.
Adafruit 2340
Module with 12-channel MPR121 capacitive touch sensor. The board is equipped with a Stemma QT connector and communicates via the I2C interface. Adafruit 4830
The modules are used to operate 7 touch fields. This is possible thanks to the built-in AT42QT1070 capacitive touch sensor. The derived I2C interface serves for communication.
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
Conductivity Sensor Switch DFRobot is a touch button that allows you to change the sensor output status by connecting terminals (positive and negative) using metal, human body or fruit and plants. It is powered by 3.3 ... 5 V. DFRobot SEN0223
No product available!
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
Touch button with red LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
The module with a touch button can be used as a replacement for traditional mechanical buttons. It is based on the TTP223 chip, which measures the capacity of the field on the module
Expansion module with touch buttons for the FRDM-KE16Z starter kit. NXP FRDM-TOUCH
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano. SB Components 21482
Module with a touch keyboard (12 buttons) based on the ATtiny1616 microcontroller. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020636
The module with the CY8C4014LQI touch sensor in the form of two buttons and a 5-segment slider. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020552
No product available!
Touch button with blue LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
Touch button with green LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems