Logic Level Converter - Bi-Directional
ID: 234535
5906623438174
zł18.60
Tax included
zł15.12 tax excl.
BOB-12009
BOB-12009 Logic Level Converter - Bi-Directional
Description:
If you’ve ever tried to connect a 3.3 V device to a 5 V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5 V signals to 3.3 V AND steps up 3.3 V to 5 V at the same time. This level converter also works with 2.8 V and 1.8 V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5 V for example) to the ‘HV’ pin, low voltage (3.3 V for example) to ‘LV’, and ground from the system to the ‘GND’ pin.
Dimensions:
- 0.63 x 0.52" (16.05 x 13.33mm)
234535
Data sheet
- Number of channels
- 4
- Voltage on page A
- 1,8 - 2,8 V
- Voltage on side B
- 3,3 - 5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
BOB-11771 Voltage-Level Translator - TXB0104 Breakout
zł28.11
24h
Available quantity: 2
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXS0108 chip.
zł19.89
24h
Available quantity: 63
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXB0108 chip.
zł19.93
24h
Available quantity: 151
Available
Module with a voltage level converter from 5 V to 3.3 V, intended for use in the STEMMA QT/Qwiic system. It has a built-in voltage stabilizer providing 3.3 V power supply with a current of up to 500 mA. Adafruit 5637
zł15.13
24h
Available quantity: 5
Available
Other products in the same category (16)
A small module with a voltage level converter that allows easy conversion of signals from 3.3V to 5V. It is compatible with a wide range of LED strips, such as NeoPixel. With easy, solderless installation, it supports up to two signal lines, ensuring smooth operation of LEDs at frequencies up to 10 MHz. Adafruit 6066
zł22.93
24h
Available quantity: 3
Available
Module designed to filter electrical signals. It uses an LC filter, which consists of a coil and a capacitor, to eliminate noise and unwanted components from the electrical signal. It can filter signals with voltages up to 30 V and currents up to 3 A
zł10.43
24h
Available quantity: 8
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXS0108 chip.
zł19.89
24h
Available quantity: 63
Available
BOB-11771 Voltage-Level Translator - TXB0104 Breakout
zł28.11
24h
Available quantity: 2
Available
4-channel converter of logic levels allowing for connection of systems operating with voltage levels of 1.8 V, 2.5 V, 3.3 V and 5 V. DFRobot DFR0843
zł17.33
24h
Available quantity: 4
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXB0108 chip.
zł19.93
24h
Available quantity: 151
Available
3V/5V voltage level converter module with built-in Step-Up converter. Allows development boards operating at 3V to be connected to a device requiring a higher operating voltage of 5V for I2C communication. Adafruit 5649
zł17.01
24h
Available quantity: 14
Available
Module with a 4-bit bi-directional voltage level converter. It allows you to connect digital interfaces with different operating voltages. KAmodNTS0104PW
zł18.91
24h
Available quantity: 383
Available
4-channel converter of voltage levels 3.3V/5V that allows you to connect systems operating at a lower voltage to those powered by a higher voltage
zł3.90
24h
Available quantity: 45
Available
A module with a set of resistors and mechanical switches that allows you to adjust the resistance in the range from 0 to 999990 Ω. SparkFun KIT-13006
zł174.00
3 weeks
No product available!
This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at different logic levels. Pololu - 2595
zł12.90
24h
Available quantity: 18
Available
8-bit voltage level converter with TXB0108 integrated circuit. It acts as a bridge between applications with different source voltages and input and output voltage levels. SB Components 21772
Regular pricezł36.89zł30.76
24h
Available quantity: 2
Available
The module with the four-bit logic translator TXB0104, can work in both directions. Connections using standard goldpin connectors with 2.54 mm pitch. It is compatible with BOB-11771
zł13.81
4 weeks
No product available!
Module with a voltage level converter 3.3 V - 5 V intended for use in the Qwiic system. It has a built-in Step Up converter providing power supply with a voltage of 5 V and a current of up to 100 mA. SparkFun SPX-17238
Regular pricezł37.08zł25.65
24h
Available quantity: 6
Available
Analog voltage divider module. It enables a 5-times reduction of the input voltage. DFRobot DFR0051
zł15.49
24h
Available quantity: 2
Available
Module with a bidirectional converter for the I2C bus, based on the PCA9306 system. It allows you to connect two I2C modules operating with different voltage levels. SparkFun BOB-15439
zł24.66
24h
Available quantity: 4
Available
BOB-12009