

zł14.16 tax excl.
3V/5V voltage level converter module with built-in Step-Up converter. Allows development boards operating at 3V to be connected to a device requiring a higher operating voltage of 5V for I2C communication. Adafruit 5649
3V/5V voltage level converter module with built-in Step-Up converter. Allows you to connect development boards operating at 3V to a device requiring a higher operating voltage of 5V. It combines a typical converter with an AP3602A DC-DC converter with a 100 mA capacity, so that circuits with different voltage levels can be connected together without the need to supply them from separate sources. The board also allows you to configure the jumpers to provide a 5 V supply while maintaining 3 V voltage levels on both sides of the converter.
The module is used for communication over the I2C interface and is equipped with two STEMMA QT/Qwiic connectors. The user also has the option of using the converter for other projects via 2.54mm goldpin connectors. It is easy to install and configure, and its small size makes it easy to place in a project. The Adafruit QT 3V to 5V Level Booster Breakout is ideal for projects that require connecting devices with different voltage levels. Full documentation is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXS0108 chip.
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXB0108 chip.
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
4-core cable with a length of 300 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5384
Module designed to filter electrical signals. It uses an LC filter, which consists of a coil and a capacitor, to eliminate noise and unwanted components from the electrical signal. It can filter signals with voltages up to 30 V and currents up to 3 A
A module enabling the conversion of input voltage in the range from 1.8 V to 5.3 V into the appropriate negative output voltage. It offers high efficiency in excess of 80%, making it ideal for applications where a lower power negative supply is required, such as biasing sensors or op-amp circuits. Pololu 2839
Voltage-to-current converter module designed for devices with a current signal input. It allows you to linearly convert voltage signals from 0 to 5 V into current signals from 0 to 20 mA
A module with a set of resistors and mechanical switches that allows you to adjust the resistance in the range from 0 to 999990 Ω. SparkFun KIT-13006
No product available!
The KAmod Level Shift x4 module is a logic level converter that enables the connection of electronic systems powered by different voltages, such as 5 V and 3.3 V. The module provides four bidirectional channels that can operate with digital signals ranging from 1.8 V to 5 V. It is an excellent choice for level conversion in I2C bus applications.
Module with a bidirectional converter for the I2C bus, based on the PCA9306 system. It allows you to connect two I2C modules operating with different voltage levels. SparkFun BOB-15439
No product available!
A small module with a voltage level converter that allows easy conversion of signals from 3.3V to 5V. It is compatible with a wide range of LED strips, such as NeoPixel. With easy, solderless installation, it supports up to two signal lines, ensuring smooth operation of LEDs at frequencies up to 10 MHz. Adafruit 6066
Module with a voltage level converter 3.3 V - 5 V intended for use in the Qwiic system. It has a built-in Step Up converter providing power supply with a voltage of 5 V and a current of up to 100 mA. SparkFun SPX-17238
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXB0108 chip.
Module with a voltage level converter from 5 V to 3.3 V, intended for use in the STEMMA QT/Qwiic system. It has a built-in voltage stabilizer providing 3.3 V power supply with a current of up to 500 mA. Adafruit 5637
This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at different logic levels. Pololu - 2595
No product available!
The module with the four-bit logic translator TXB0104, can work in both directions. Connections using standard goldpin connectors with 2.54 mm pitch. It is compatible with BOB-11771
The SN74LVC1T45DRLR from Texas Instruments is a single-channel, bidirectional voltage level translator, covering a range from 1.65 V to 5.5 V, ideal for signal conversion in microprocessor systems and mobile devices. With automatic detection of the transmission direction and a compact SMD SOT-5X3 package, the device is easy to implement and works well in limited mounting spaces.
4-channel converter of logic levels allowing for connection of systems operating with voltage levels of 1.8 V, 2.5 V, 3.3 V and 5 V. DFRobot DFR0843
BOB-11771 Voltage-Level Translator - TXB0104 Breakout
3V/5V voltage level converter module with built-in Step-Up converter. Allows development boards operating at 3V to be connected to a device requiring a higher operating voltage of 5V for I2C communication. Adafruit 5649