Logic converter with TXB0104 circuit
ID: 565010
5906623456109
zł13.81
Tax included
zł11.23 tax excl.
The module with the four-bit logic translator TXB0104, can work in both directions. Connections using standard goldpin connectors with 2.54 mm pitch. It is compatible with BOB-11771
Description
Module with four-bit logic translator TXB0104. It can work in both directions. Connections using standard 2.54mm goldpin connectors. It is compatible with BOB-11771
properties
- Permissible power supply voltages
- Port A: 1.2 - 3.3 V
- Port B: 1.65 - 5.5 V (provided that it is greater than or equal to port A)
- Output isolation: If both power ports are connected to ground, the outputs of the system will be in a high impedance state
- Low power consumption - maximum 5 μA
- Dimensions: 18 x 12 mm
Included
- The converter module is logical
- 2 goldpin connectors 7-pins
565010
Data sheet
- Number of channels
- 4
- Voltage on page A
- 1,2 - 3,3 V
- Voltage on side B
- 1,65 - 5,5 V
You might also like
This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at different logic levels. Pololu - 2595
zł12.90
24h
Available quantity: 29
Available
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXS0108 chip.
zł19.89
24h
Available quantity: 76
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXB0108 chip.
zł19.93
24h
Available quantity: 155
Available
Module with a voltage level converter from 5 V to 3.3 V, intended for use in the STEMMA QT/Qwiic system. It has a built-in voltage stabilizer providing 3.3 V power supply with a current of up to 500 mA. Adafruit 5637
zł15.13
24h
Available quantity: 7
Available
Other products in the same category (16)
A module with a set of resistors and mechanical switches that allows you to adjust the resistance in the range from 0 to 999990 Ω. SparkFun KIT-13006
zł174.00
3 weeks
No product available!
A module enabling the conversion of input voltage in the range from 1.8 V to 5.3 V into the appropriate negative output voltage. It offers high efficiency in excess of 80%, making it ideal for applications where a lower power negative supply is required, such as biasing sensors or op-amp circuits. Pololu 2839
zł14.75
24h
Available quantity: 1
Available
Available
8-channel voltage level converter module with an input voltage of 12 V and an output voltage of 3.3 V. Unidirectional, based on resistor dividers. Numato Lab NLVD00008
zł41.77
24h
Available quantity: 4
Available
4-channel converter of logic levels allowing for connection of systems operating with voltage levels of 1.8 V, 2.5 V, 3.3 V and 5 V. DFRobot DFR0843
zł17.33
24h
Available quantity: 7
Available
8-bit voltage level converter with TXB0108 integrated circuit. It acts as a bridge between applications with different source voltages and input and output voltage levels. SB Components 21772
zł37.37
24h
Available quantity: 1
Available
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXS0108 chip.
zł19.89
24h
Available quantity: 76
Available
Analog voltage divider module. It enables a 5-times reduction of the input voltage. DFRobot DFR0051
zł15.76
24h
Available quantity: 2
Available
Bi-directional 8-channel logic level converter module (1.2-3.6V to 1.7-5.5V) based on TXB0108 chip.
zł19.93
24h
Available quantity: 155
Available
3V/5V voltage level converter module with built-in Step-Up converter. Allows development boards operating at 3V to be connected to a device requiring a higher operating voltage of 5V for I2C communication. Adafruit 5649
zł17.42
24h
Available quantity: 5
Available
A small module with a voltage level converter that allows easy conversion of signals from 3.3V to 5V. It is compatible with a wide range of LED strips, such as NeoPixel. With easy, solderless installation, it supports up to two signal lines, ensuring smooth operation of LEDs at frequencies up to 10 MHz. Adafruit 6066
zł22.60
24h
Available quantity: 3
Available
BOB-11771 Voltage-Level Translator - TXB0104 Breakout
zł27.90
24h
Available quantity: 3
Available
The KAmod Level Shift x4 module is a logic level converter that enables the connection of electronic systems powered by different voltages, such as 5 V and 3.3 V. The module provides four bidirectional channels that can operate with digital signals ranging from 1.8 V to 5 V. It is an excellent choice for level conversion in I2C bus applications.
zł14.90
24h
Available quantity: 276
Available
8-channel voltage level converter allowing for connection of systems operating with the voltage level of 1.8 V, 2.5 V, 3.3 V and 5 V. SparkFun BOB-19626
zł26.09
24h
Available quantity: 1
Available
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000
zł28.33
24h
Available quantity: 3
Available
The module with the four-bit logic translator TXB0104, can work in both directions. Connections using standard goldpin connectors with 2.54 mm pitch. It is compatible with BOB-11771