zł209.15 tax excl.
An indoor ThinkNode G4 gateway designed for building IoT networks based on Wi-Fi HaLow (IEEE 802.11ah) technology, providing long-range communication in the Sub-1 GHz frequency band. The device supports Wi-Fi HaLow, conventional 2.4 GHz WiFi, and 10/100 Mb/s Ethernet simultaneously, offering AP, STA, and Mesh operating modes. The platform, based on the HLK-7628N processor with 128 MB DDR2 RAM and 32 MB Flash memory, supports configuration through a web interface and remote OTA firmware updates. The gateway is intended for industrial automation, smart city, agriculture, monitoring, and IoT communication applications. ThinkNode G4 Wi-Fi HaLow Gateway
The ThinkNode G4 gateway enables the creation of wireless networks based on IEEE 802.11ah Wi-Fi HaLow technology. Operating in the Sub-1 GHz frequency band provides longer communication range and better signal penetration through walls and obstacles than conventional 2.4 GHz WiFi. According to the manufacturer, the gateway offers a line-of-sight range exceeding 1 km and data rates up to 32 Mb/s, making it suitable for large-scale IoT deployments, industrial automation, smart cities, agriculture, and monitoring systems.
ThinkNode G4 is based on the HLK-7628N module with 128 MB DDR2 RAM and 32 MB Flash memory. The gateway supports Wi-Fi HaLow communication in the 850–950 MHz band as well as conventional 2.4 GHz WiFi compliant with IEEE 802.11 b/g/n. An integrated 10/100 Mb/s Ethernet port allows straightforward integration into existing network infrastructure. Support for AP, STA, and Mesh operating modes enables the device to function as an access point, wireless client, or node within a mesh network. Configuration is performed through a web interface, while the firmware supports remote OTA updates.


Wi-Fi HaLow technology combines longer communication distances with higher throughput than LPWAN technologies designed for transmitting only small amounts of data. Operation in the Sub-1 GHz frequency band improves signal penetration through buildings and other obstacles while enabling communication with a large number of connected devices. The gateway supports WPA3 security as well as AES and SHA encryption algorithms. According to the manufacturer, a single gateway can support more than four times as many connected devices as a conventional WiFi access point. The device is suitable for applications including monitoring, smart metering, industrial automation, asset management, and large-scale IoT deployments.
The device provides all interfaces required for power supply, configuration, and network communication. The enclosure includes an RJ45 Ethernet port, a USB Type-C power connector, a CFG button, and dedicated antenna connectors for Wi-Fi HaLow and 2.4 GHz WiFi. Operating status is indicated by the PWR, HaLow, and LINK LEDs, which display power, Wi-Fi HaLow connection status, and gateway configuration status.
Main panel functions:
The manufacturer provides comprehensive documentation, including a Wiki and User Manual, containing installation instructions, configuration procedures, operating modes, and technical specifications.

The ThinkNode G4 gateway can operate as an Access Point, Client, or Mesh node, enabling the deployment of extensive Wi-Fi HaLow networks for IoT devices. Its compact enclosure supports wall mounting, while the operating temperature range of -20°C to 70°C allows installation in indoor as well as demanding industrial environments.
Data sheet
Manufacturer
Responsible person
With an integrated ESP8266 WiFi controller this module is a one-stop shop for almost any Internet-connected project. Firmware can be developed in Arduino and uploaded over a simple, serial interface. WRL-13711
Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
Easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project. WRL-13794
LPT100 WiFi Module Mother Board
An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335
ESP8266 based Arduino board for ArduCAM mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. ArduCAM B0082
No product available!
ArduCAM CC3200 UNO Board CC3200 UNO is full featured development board almost like a combination of CC3200 Launchpad plus CC3200CAMBOOST pack from TI while keeping exactly the same size as Arduino UNO and pin out. B0078
Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
Wifi module with ESPR8266 ESPRESSIF for communication in the 2.4 GHz band. It is powered by a voltage from 3 V to 3.6 V, available in an SMD enclosure. ESP-WROOM-02
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
An IoT module that combines a microcontroller with an ARM-Cortex M3 core, WiFi and NFC. It can be programmed in the Arduino IDE or in the Micropython language. DFRobot DFR0477
Evaluation set for IoT applications. Rich set of equipment in such peripheral systems as WiFi, OLED display, headphones, microphone, sensors (temperature, humidity, motion, pressure) make it a complete tool that will be used in many projects. DFRobot DFR0512
Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. Adafruit 3653
Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. Adafruit 3654
WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
No product available!
An indoor ThinkNode G4 gateway designed for building IoT networks based on Wi-Fi HaLow (IEEE 802.11ah) technology, providing long-range communication in the Sub-1 GHz frequency band. The device supports Wi-Fi HaLow, conventional 2.4 GHz WiFi, and 10/100 Mb/s Ethernet simultaneously, offering AP, STA, and Mesh operating modes. The platform, based on the HLK-7628N processor with 128 MB DDR2 RAM and 32 MB Flash memory, supports configuration through a web interface and remote OTA firmware updates. The gateway is intended for industrial automation, smart city, agriculture, monitoring, and IoT communication applications. ThinkNode G4 Wi-Fi HaLow Gateway