WiFI and Bluetooth module ESP-WROOM-32
ID: 563420
5902186312623
zł38.93
Tax included
zł31.65 tax excl.
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111
Descritpion
ESP-WROOM-32 is the latest Espressif ESP32 WiFi and Bluetooth module. It has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. ESP32 is equipped with a high-performance Tensilica LX6 dual-core microprocessor. One core supports high speed connection and the other core is used to support user applications.The dual-core MCU has a 240 MHz frequency and 600 DMIPS computational power. The system integrates many peripheral devices, including capacitive touch sensors, Hall sensors, low noise amplifiers, SD card interfaces, Ethernet interfaces, fast SDIO / SPI, UART, I2S and I2C, etc. ESP32 has been designed for mobile devices and Internet of Things (IoT) applications. In addition, ESP32 achieves very low energy consumption. The module has an integrated antenna.
Features
- Processor and memory
- Dual-core 32-bit Xtensa® LX6 microprocessor, up to 600 DMIPS
- 448 KB of ROM
- 520 KB SRAM
- 16 KB SRAM in RTC
- QSPI Flash / SRAM, up to 4 x 16 MB
- Power supply: 2.2 ... 3.6 V<?li>
- Clocks and Timers
- Internal 8 MHz oscillator with calibration
- Internal RC oscillator with calibration
- External quartz oscillator from 2 MHz to 40 MHz
- External quartz oscillator 32 kHz for RTC with calibration
- Two timer groups, including 2 x 64-bit timers and 1 x main watchdog
- RTC clock with the accuracy of one second
- RTC watchdog<?li>
- Advanced Peripheral Interfaces
- 12-bit SAR ADC for 18 channels
- 2 × 8-bit D / A converters
- 10 x touch sensors
- Temperature sensor
- 4 × SPI
- 2 × I2S
- 2 × I2C
- 3 × UART
- 1 host (SD / eMMC / SDIO)
- 1 slave (SDIO / SPI)
- Ethernet MAC interface with dedicated support for DMA and IEEE 1588
- CAN 2.0
- IR (TX / RX)
- PWM motor
- LED PWM up to 16 channels
- Hall sensor
- Analog preamplifier with very low power
- Development Support
- SDK Firmware for fast programming on-line
- Open toolchains based on GCC
- Operating temperature range: -40°C to +85°C
- Dimensions: 18mm x 25mm x 3mm
563420
Data sheet
- Logic voltage
- 3,3 V
- Wi-Fi chip
- ESP32
- Wi-Fi standard
- 802.11 b/g/n
- Frequency range
- 2,4 GHz
- Baud rate
- 150 Mbps
- Antenna connector
- Brak
- Power supply voltage
- 2,2 - 3,6 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
zł118.39
24h
Available quantity: 3
Available
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
zł48.78
24h
Available quantity: 7
Available
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł49.18
24h
Available quantity: 1
Available
Other products in the same category (16)
ESP32-P4-WIFI6-POE-ETH is a high-performance Waveshare development board based on the ESP32-P4 and ESP32-C6 microcontrollers, designed for advanced HMI, edge computing, multimedia, industrial automation, and networked systems. It supports Wi-Fi 6, Bluetooth 5 LE, 100 Mbps Ethernet with PoE, and a rich set of I/O and multimedia interfaces. ESP32-P4-WIFI6-POE-ETH
zł113.32
6 weeks
No product available!
ESP32-S3 development board featuring a dual-core 240MHz processor, 2.4GHz Wi-Fi connectivity, 32MB Flash and 16MB PSRAM, supplied in a version with factory pre-soldered pin headers, designed for AIoT and embedded system projects. Waveshare ESP32-S3-DEV-KIT-N32R16V-M
zł75.45
6 weeks
No product available!
Development board based on the ESP32-S3-WROOM module with a dual-core 240 MHz processor, 32 MB Flash and 16 MB PSRAM, supporting 2.4 GHz Wi-Fi and Bluetooth LE, designed for IoT and AIoT projects. Waveshare ESP32-S3-DEV-KIT-N32R16V
zł68.01
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a round 1.32-inch AMOLED capacitive touch display with a resolution of 466 × 466, support for 2.4 GHz Wi-Fi and Bluetooth 5 LE, as well as audio circuitry and expansion interfaces. Designed for wearable projects, user interfaces, IoT applications, and voice interaction solutions. ESP32-S3-Touch-AMOLED-1.32
zł103.16
6 weeks
No product available!
ESP32-C6 1.32inch AMOLED Round Touch Display Board, 466×466 Pixels, QSPI Interface - Waveshare 32766
ESP32-C6 1.32inch AMOLED Round Touch Display Development Board, 466×466 Pixels, QSPI Interface, Supports Wi-Fi 6 and Bluetooth 5. ESP32-C6-Touch-AMOLED-1.32
zł97.31
6 weeks
No product available!
ESP32-C6-based programmable smartwatch development board featuring a 2.06-inch AMOLED touch display with a resolution of 410 × 502, supporting Wi-Fi 6, Bluetooth 5 and Zigbee, designed for DIY wearable device development and prototyping. Waveshare ESP32-C6-Touch-AMOLED-2.06-EN
zł135.61
6 weeks
No product available!
A smartwatch-style development board based on the ESP32-C6 microcontroller, featuring a 2.06-inch AMOLED touch display with 410 × 502 resolution, supporting Wi-Fi 6, Bluetooth 5 and Zigbee, designed for DIY construction and prototyping of wearable devices, with an MX1.25 lithium battery included. Waveshare ESP32-C6-Touch-AMOLED-2.06
zł139.48
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi and Bluetooth 5 connectivity, onboard audio codec, microphones, and speaker, designed for IoT projects and interactive applications. Waveshare ESP32-S3-Touch-LCD-1.83-EN
zł99.22
6 weeks
No product available!
Development board based on the ESP32-S3 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi and Bluetooth 5 connectivity, onboard audio codec, microphones, speaker, and an included 3.7 V lithium battery, designed for IoT projects and interactive applications. Waveshare ESP32-S3-Touch-LCD-1.83
zł103.98
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, featuring a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 pixels, enclosed in an elegant solid wood frame. The device offers ultra-low power consumption, Wi-Fi and Bluetooth connectivity, AIoT capabilities, voice interaction, and photo and information display, making it ideal for decorative and informational applications. ESP32-S3-PhotoPainter (no BAT)
zł347.29
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, equipped with a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 px, enclosed in an elegant solid wood frame. Support for Wi-Fi, Bluetooth, AIoT, and voice interaction, combined with ultra-low power consumption and the option of powering from a 3.7 V lithium battery, makes it suitable for decorative and informational applications. Waveshare ESP32-S3-PhotoPainter
zł346.71
6 weeks
No product available!
A compact development platform based on the dual-core ESP32-S3 processor, designed for prototyping embedded systems and IoT projects. The device features a 1.14-inch LCD display, a 56-key keyboard, and extensive audio features with a microphone, speaker, and headphone jack. A built-in accelerometer, IR emitter, microSD slot, and Grove connectors enable easy expansion and integration with sensors. Powered by a 1750 mAh Li-ion battery, it offers portability and long battery life. M5Stack K132-Adv
zł171.55
24h
Available quantity: 20
Available
ESP32 development board with Ethernet interface and support for passive PoE 9–57 V, featuring USB-C, 17 GPIO and a 5 V 2 A power output, designed for IoT projects requiring a stable wired network connection. Elecrow CQE0005P1
zł177.37
24h
Available quantity: 2
Available
An educational kit for learning machine learning and tinyML, based on the XIAO ESP32-S3 Sense module with a built-in camera and microphone. It includes an expansion board with a 6-axis IMU sensor, OLED display, and microSD card reader, allowing you to work with video, audio, and motion data. The kit supports the Arduino IDE, TensorFlow Lite, and the SenseCraft AI platform, allowing you to easily train and deploy ML models on edge devices. Seeed Studio E2025080501
zł229.63
4 weeks
No product available!
Development board based on the ESP32-C6 microcontroller with a 1.8-inch capacitive AMOLED touch display at 368 x 448 resolution, supporting Wi-Fi 6, BLE 5, Zigbee, and Thread, designed for advanced IoT projects and user interfaces. Waveshare ESP32-C6-Touch-AMOLED-1.8
zł135.94
6 weeks
No product available!
Accessory kit designed for use with ESP32-C3-Zero-Basic-Kit, ESP32-C6-Zero-Basic-Kit, and ESP32-S3-Zero-Basic-Kit, containing components for learning electronics and prototyping IoT projects. Waveshare ESP32-XX-Basic-Kit-Acce
zł70.11
24h
Available quantity: 4
Available
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111