Category: RETIRED PRODUCTS

Complete housing for ODROIDA XU4 / XU4Q in black

Complete case for ODROIDA XU4 / XU4Q - transparent (Case Clear)

Shield with MEMS sensors: accelerometer, gyroscope, magnetometer, pressure, humidity and temperature sensor. Shield is designed to work with plates from the STM32 Nucleo family (connector in accordance with the Arduino UNO R3 standard). Sensors use I2C interface for communication. STMicroelectronics X-NUCLEO-IKS01A3

A set of wireless keyboard and mouse working on the 2.4 GHz frequency. It can be used with minicomputers eg Raspberry Pi, BeagleBone, Odroid or Orange Pi. BLOW KM-1

Portable set of ToF laser scanner with a range of 40m, characterized by high resolution (9,200 samples per second) and high stability and accuracy of measurements. Seeed Studio 114090021

Board with WiFi module with ESP32 chip and OV2640 camera. The module is characterized by small size and low current in sleep mode. ESP-32CAM can be widely used in various IoT applications. ESP32-CAM

The switch module has a relay with a control function via a WiFi network. It can be connected to a WiFi network or act as a stand-alone access point. It has the function of measuring electricity consumption and protection against overload / overheating. Shelly 1PM

Digital LED voltmeter 0,28 "with measuring range 0-100 V. Module powered with 3-30V voltage.

Driver for saunas and heating systems, allowing the system to be turned on and off, and control the temperature via a WiFi network using the smartphone application without the use of additional peripherals. BleBox SaunaBox

FPF1048BUCX, Power Switch ICs - Power Distribution IntelliMAX Slew Rate Controlled Load Switch, WLCSP-6

A mains charger with a USB socket and a built-in type-C USB cable. The maximum current generated by the charger is 3.1 A. eXtreme NTC31CU

WIFI-LPT100-B is a small module that enables communication using a wireless WiFi network. It has a UART interface, and is characterized by low energy consumption.

5 megapixel camera module compatible with Coral Dev Board. Connects via the MIPI-CSI interface. Coral Camera

Evaluation kit with i.MX 8M Mini Quad processor. It consists of a motherboard and a plate with an application processor plugged into the motherboard. The set has a WiFi module and Bluetooth 4.1 and a built-in chip antenna, connectors for display, audio and USB 3.0. NXP 8MMINILPD4-EVK

EMMC Flash memory module for Hardkernel Odroid N2 computers. 8GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Android

Module 4-channel opertego switch with relays with the control function via WiFi network. It has three operating modes: as an Access Point, as a local device or as a work mode in the cloud. Shelly 4Pro

The switch module has a relay with a control function via a WiFi network. It can be connected to a WiFi network or act as a stand-alone access point. Shelly 1 Open Source

MP3 player module controlled by the I2C interface. It is based on a class D amplifier with a power of 1.4 W. The board has a 3.5 mm headphone output and an 8 Ω speaker connector. Audio files are saved on the microSD card. SparkFun DEV-15165

Development board with an ESP32 module based on a 32-bit Xtens LX6 processor. It has been equipped with a number of peripheral systems such as RGB LED matrix, accelerometer, magnetometer, gyroscope, light sensors and programmable buttons. Banana Pi BPI-Bit

Module with DRV2605L vibration motor controller and Y axis LRA motor. It allows you to add haptic feedback (vibration effect). SparkFun ROB-15181