LED RGB WS2812B, Black Strip, 5m, 30LEDs / m, no waterproof

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-1000-R

This soil moisture sensor uses a resistive measurement between two gold-plated probes. Corrosion resistance ensures long life and stable measurements. It works with the micro:bit and Arduino platforms, allowing for reading soil moisture levels as an analog signal. Adafruit 6362

The module with the TPL5110 timer, which can generate a signal with an adjustable period from 100 ms to 2 h. It also works well as an external Watchdog Timer. Adafruit 3435

Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019

A switching converter that regulates 9V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5584

A switching converter that stabilizes a 15V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5586

A switching converter that regulates 18V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5587

A step-down converter module that allows you to reduce the input voltage from 9.2–36V to a stable 9V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows you to power microcontrollers, IoT modules, and other electronics. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5596

A step-down converter module that allows for input voltage reduction from 7.6-36V to a stable 7.5V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5595

A step-down converter module that allows for input voltage reduction from 6.1–36V to a stable 6V level, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5594

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 3.5x1.35 mm DC plug

Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836

Data logger with USB type C connector. Data is received via the UART interface and saved on the built-in Flash memory with a capacity of 128 MB. DFRobot TEL0147

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 7.4x5.0 mm DC plug. Maximum power up to 100 W

BOB-13906

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. BOB-13878