The module with a gesture detection sensor PAJ7620U2 designed for M5Stack sets. He can recognize 9 gestures and communicates via the I2C interface. M5Stack U127

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-1000-B

HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω

Pololu 4-Channel RC Servo Multiplexer (Partial Kit)

The Step-UpU1V11F3 Buck Voltage Regulator module with output voltage 3.3V, input voltage range of 0.5-5.5V and a maximum output current of 1.2A. Pololu 2561

Pololu 4-Channel RC Servo Multiplexer (Assembled)

Brushless DC motor (BLDC) driver with speed control by potentiometer. It can operate motors powered with a voltage from 7 to 12 V with a current consumption of up to 1.2 A

Set of 10 cables, 50 cm long, for digital sensors compliant with the Gravity standard. DFRobot FIT0756

Single-core, multi-strand wire in red silicone insulation. Thickness 28AWG, length 4m

7-segment LED display, 1 number 14,20mm, red color (640nm), 6000 ucd (10mA), common cathode, Pb-free. LED1-AS-B-05613AS

7-segment LED display, 1 digit 25.40mm, green (575nm), 7000ucd (10mA), common anode, red (630nm), 13000ucd (10mA), common anode. Pb-free. LED1-AS-B-10016DMRMG

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM333

The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the SPI interface. Pimoroni PIM473

Keyboard module with 10 tact switch buttons. The state of the buttons can be read using digital pins or a common analog output. DFRobot DFR0792

Module with 5x5 RGB LED matrix display (25 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM435

GPS module with 72-channel GNSS NEO-M8P-2 receiver. It can receive data from GPS, GLONASS and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 25mm. SparkFun GPS-15005

The GY‑271 module with HMC5883L sensor is a precise digital compass offering three-axis magnetic field measurement, I²C communication, and 3 V–5 V operation. Suitable for robotics, navigation, and embedded systems requiring low power consumption and a compact form factor. GY‑271

The Microchip system in the DIP8 housing, a dual driver, allows the MOSFET transistors to be controlled with a high switching speed. The controller is characterized by low power consumption, high current efficiency when loading eg gate capacity, or ESD resistance up to 4kV