Module with a 7-color ACeP e-Paper display with a diagonal of 5.7" and a resolution of 600 × 448 px. It communicates via the SPI interface. Pimoroni PIM609

Module with a pulse sensor and the level of SpO2 (oxygen saturation level). It is based on the MAX30102 chip and communicates via the I2C or UART interface (Gravity connector). DFRobot SEN0518

5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (G)

Decoder dedicated to receive digital terrestrial TV programs in the DVB-T2 H.265 standard. Designed for TVs with HDMI, USB, SCART and RF input. BLOW 4625FHD

Module with a capacitive fingerprint sensor. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020713

This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109

Module with black and white 10-digit LCD display. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5379

Development board with ATmega4809 microcontroller and Microchip ECC608 cryptographic chip. It is equipped with 6 analog input pins, 14 digital inputs/outputs (5 as PWM output) and Grove ports. Seeed Studio 102010288

Multilingual voice synthesizer module. Converts a stream of digital text to natural sound. Using the widely recognized DECtalk text and speech synthesizer engine. Sparkfun DEV-11711

Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250

RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721

A small module with a 3-axis magnetometer based on the Melexis MLX90393 system. Its resolution is 0.161 μT. I2C or SPI interface is used for communication. The I2C interface has been derived on connectors compatible with the Qwiic standard. SparkFun SEN-14571

4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210

RGB LED matrix display with a resolution of 64 x 64 (4096 LED). Adafruit 5362

Step-Up/Step-Down converter module based on the S13V20F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 2,5 A. Pololu 4085

DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982

100x16 Graphic OLED Display, 80x36mm, Negative Black Surface, Yellow Dot, 5V, RoHS

Advanced expansion board for Arduino. It has support for mini-SIM cards and NB-IoT cards. Thanks to the GNSS module (Global Navigation Satellite System), it supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. The module is powered by 7-12V voltage. DFRobot DFR0572

Module with a stepper motor driver based on the DRV8825 system. allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage up to 45 V. Pololu 2987

Alphanumeric display 16 characters in two rows, content black, white background with backlight.