The module with the HCM472 digital attenuator with the operating frequency range from 1 MHz to 3.8 GHz. Has an adjustable damping factor ranging from 0 to 31.5 dB with 6-bit resolution (0.5 dB step)

Internal antenna Bluetooth, ZigBee, WLAN, chip SMD, 2.45GHz, gain 1.5dBi, dimension 9.5x2.1x1mm, Rainsun, RoHS

Laser distance sensor with a measuring range from 0.1 m to 40 m. Optimized for industrial applications. Benewake TF02-i

IPS 3.5" LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch panel. Resolution 640x480 pixels. Waveshare 3.5inch DPI LCD

Adapter for PS2 (female) connector. The connector is pre-soldered on the PCB. The pins have a 2.54 mm pitch, which facilitates their installation on the breadboard. Cytron Breakout Board PS2 Connector

IPS LCD display 7" with a resolution of 1024x600 px with a touch panel. It uses the eDP interface and is compatible with LattePanda Alpha and Delta. DFRobot FIT0551

Ambient light sensor placed in a transparent hemisphere. It supports a detection range of 0 to 200 klx and communicates via the I2C interface. DFRobot SEN0390

Sound recording module that can store sounds up to 40 minutes long. It allows you to download the recordings to a computer via USB type C. DFRobot DFR0745

TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453

The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243

The MAX31865 amplifier module is an ideal tool for accurate temperature measurement in various applications. It is compatible with 2, 3 or 4-wire PT100 RTD temperature probes. Adafruit 3328

IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. YELLOW matrix. Adafruit 3135

8x8 matrix or a 4-digit 7-segment display. Matrices like these are \'multiplexed\' - so to control all the seven-segment LEDs you need 14 pins. Adafruit 1002

Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036

The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027