Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285

Module with a soil moisture sensor for the M5Stack sets. It has an analog output and a digital output with adjustable reaction threshold. M5Stack U019

A module with a joystick designed for M5Stack sets. Returns data from two axes and button state via the I2C interface. M5Stack U024-C

A set of adapters dedicated to the XGecu T56 universal memory programmer. Enable memory support in BGA48, BGA63, TSOP56, SOP56 and EMMC153/160 package

Adapter dedicated to the XGecu T56 universal memory programmer. Allows memory support in the BGA64 package

Step-Down converter with input voltage up to 36 V which effectively reduces it to 3.3 V, while maintaining current up to 500 mA. Pololu 2842

Module with a black and white OLED display 1.3" with a resolution of 128x64 pixels. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U119

Brushless DC motor (BLDC) driver with speed control by potentiometer. It can operate motors powered with a voltage from 7 to 12 V with a current consumption of up to 1.2 A

The UM7 orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates.

The cap with the Zener ESP Waves Design dedicated to the button of the mechanical keyboard with switches compatible with Cherry MX. Made of translucent material. Adafruit 5104

The cap with the Zener ESP Plus Design dedicated to the button of the mechanical keyboard with switches compatible with Cherry MX. Made of translucent material. Adafruit 5107

The cap with the Zener ESP Star Design dedicated to the button of the mechanical keyboard with switches compatible with Cherry MX. Made of translucent material. Adafruit 5105

This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109

The cap with the Zener ESP Square Design dedicated to the button of the mechanical keyboard with switches compatible with Cherry MX. Made of translucent material. Adafruit 5106

Set of 24 keycaps for keyboard. They have a milky-transparent layer, thanks to which they perfectly match the LED backlight. Adafruit 5148

Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver

The USB-C to DisplayPort cable allows for a direct connection of a monitor to a USB-C port, eliminating the need for additional adapters. With USB 3.2 Gen 2 bandwidth, it supports video transmission in up to 4K quality at 60Hz, ensuring clear visuals and smooth performance.  CA-CMDP-10CU-0010-BK

Module with the 3-axis ADXL313 accelerometer with measuring ranges of ± 0.5 g, ± 1 g, ± 2 g or ± 4 g. The system is characterized by high 13-bit resolution and low power consumption. SparkFun SEN-17241

2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423