Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4313

Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4353

The expansion module (shield) is designed for Arduino boards. It enables easy connection of 16x32 and 32x32 matrix displays. Requires self-assembly. Adafruit 2601

Module with an ambient light sensor VEML6030 with a measuring range up to 120,000 lx. It enables light measurement with 16-bit resolution. I2C communication. SparkFun SEN-15436

Module with digital temperature sensor TMP102. It enables temperature measurement in the range from –40°C to 125°C with an accuracy of 0.5°C. The system communicates via the I2C interface. SparkFun SEN-16304

Module with digital barometer BMP390. It enables pressure measurement from 300 to 1250 hPa and temperature from -40℃ to 85℃. Communicates via I2C or SPI. Adafruit 4816

Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a screw connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16295

Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a PCC connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16294

Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60

GPS module with 72-channel GNSS SAM-M8Q receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART and I2C interfaces. SparkFun GPS-15210

The camera module with the Sony IMX219 sensor with motorized IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0154

The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0152

A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4566

Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660

A module with a high precision temperature sensor based on the MCP9808 chip. It allows for measurements with an accuracy of ±0.25°C and communicates via the I2C interface. DFRobot SEN0435

Module with an ambient oxygen concentration sensor. The system allows you to measure the oxygen volume in the range up to 25% with a resolution of 0.15%. The module communicates via the I2C interface. DFRobot SEN0322

LCD IPS module with a screen diagonal of 1,54" and a resolution of 240x240 pixels. The display has a built-in ST7789 driver and communicates via the SPI interface. The display can also work via the GDI port. DFRobot DFR0649

LCD IPS module with a screen diagonal of 2" and a resolution of 320x240 pixels. The display has a built-in ST7789V driver and communicates via the SPI interface. The display can also work via the GDI port. DFRobot DFR0664

Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 55°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4407

Module with a 1.5" black and white OLED display with a resolution of 128x128. Offers 16 gray levels and communicates via the I2C or SPI interface. Adafruit 4741