.png)
Fermion: MCP9808 High Accuracy I2C Temperature Sensor - module with a temperature sensor
ID: 1178726
5902186310254
zł29.54
Tax included
zł24.02 tax excl.
A module with a high precision temperature sensor based on the MCP9808 chip. It allows for measurements with an accuracy of ±0.25°C and communicates via the I2C interface. DFRobot SEN0435
Description
A module with a high precision temperature sensor based on the MCP9808 chip. It offers a high accuracy of ± 0.25°C in the range from -40 to 125°C with a resolution of 0.0625°C. The module is compatible with 3.3 V and 5 V controllers, and communication is via the I2C interface. The bus address can be modified with three pins, which allows you to choose one of the 8 available addresses. Full documentation is available on the product page.
Features
- Accuracy: 0.25°C in the range from -40°C to 125°C
- Resolution 0.0625°C
- Up to 8 sensors on one I2C bus
- Jumpers for I2C address configuration
- Power and logic voltage range from 2.7 V to 5.5 V
- Working current: 200 μA
- Dimensions: 18.5 x 23 mm
Kit contains
- Fermion: MCP9808 High Accuracy I2C Temperature Sensor
- 8-pin goldpin male connector
1178726
Data sheet
- Interface
- I2C
- Type of sensor
- MCP9808
- Power supply voltage
- 2.7..5.5V
- Sensor type
- Temperatury
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.90
Delivery date unknown
No product available!
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.90
24h
Available quantity: 209
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.48
24h
Available quantity: 396
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.10
24h
Available quantity: 488
Available
Other products in the same category (16)
The MAX31865 amplifier module is an ideal tool for accurate temperature measurement in various applications. It is compatible with 2, 3 or 4-wire PT100 RTD temperature probes. Adafruit 3328
zł79.43
24h
Available quantity: 3
Available
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł13.76
24h
Available quantity: 2
Available
Available
Waterproof temperature sensor adapted to work with Sonoff TH10 / TH16
zł23.62
24h
Available quantity: 10
Available
A module with a temperature sensor based on the absorption of infrared radiation. Enables non-contact measurement. modTMP006
zł51.82
4 weeks
No product available!
MAX31865-based module designed for use with PT1000 RTD temperature sensors in 2-, 3- or 4-wire configurations. SPI communication enables connection to microcontrollers, while the 3.3 V regulator and logic level shifting provide compatibility with 5 V systems. PT1000 sensor is not included. Adafruit 3648
zł83.71
24h
Available quantity: 4
Available
LM35 analog temperature sensor module for Arduino. DFRobot DFR0023
zł16.29
24h
Available quantity: 2
Available
Gravity: DS18B20 Temperature Sensor is a module with a temperature sensor compatible with Arduino boards. The module can be supplied with 3.3-5V voltage and measures the temperature in the range -55 ~ 125 ° C. DFRobot DFR0024
zł25.89
24h
Available quantity: 4
Available
Module with MLX90614-DCI sensor for non-contact temperature measurement in the range from -70℃ to 270℃. I2C communication. DFRobot SEN0263
zł359.76
4 weeks
No product available!
Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł17.90
24h
Available quantity: 382
Available
High temperature measuring kit. It consists of a signal conversion module with a range of -270°C to 1372°C and a K-type thermocouple probe with a range of up to 800°C. I2C communication DFRobot DFR0558
zł126.64
4 weeks
No product available!
Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.
zł13.90
24h
Available quantity: 290
Available
Non-contact temperature sensor. Used to measure the infrared intensity of an object to calculate the surface temperature without a contact point in the range -70 ... 380 ° C. DFRobot SEN0256
zł415.47
24h
Available quantity: 1
Available
Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264
zł413.49
4 weeks
No product available!
Temperature sensor based on the DS18B20 system in a water proof measuring probe. Communication via the 1-Wire interface. DFRobot DFR0198
zł26.95
24h
Available quantity: 7
Available
A set with a temperature sensor based on the DS18B20 system in the form of a waterproof measuring probe, a sensor adapter and a cable. Communication via the 1-Wire interface. DFRobot KIT0021
zł26.92
24h
Available quantity: 1
Available
A module with a high precision temperature sensor based on the MCP9808 chip. It allows for measurements with an accuracy of ±0.25°C and communicates via the I2C interface. DFRobot SEN0435