Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels. It is equipped with a 40-pin GPIO connector and can work with Raspberry Pi minicomputers. It communicates via the SPI interface. Pimoroni PIM667

Transparent prototype contact board with 400 points, dimensions 82x55x10 mm, with double-sided adhesive tape. PPS0400T

RS422 to TTL converter module based on MAX490 for long-distance bidirectional serial communication, up to 1000 meters, with a transmission speed of up to 2.5 Mbps. Equipped with ESD protection up to 15 kV, TVS diodes and 120 Ω terminating resistors, it provides stability and immunity to interference in demanding industrial conditions. Powered by 5 V, it works with TTL logic and is compatible with popular platforms, and LED indicators facilitate diagnostics and integration.

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5255

This energy-efficient black-and-white e-Paper display with a resolution of 1360 x 480 pixels provides a clear image even in direct sunlight. With a wide viewing angle of over 170° and zero power consumption in idle mode, it\'s ideal for applications requiring constant information display. It supports the SPI interface and is compatible with Raspberry Pi, Arduino, STM32, and ESP32. Waveshare 10.85-inch e-Paper

Quartz resonator, housing HC49S (low), RoHS

IPS LCD display with a touch panel with a screen diagonal of 11.9". It offers a resolution of 320 x 1480 pixels and an HDMI input, which allows you to easily connect the display to various signal sources. Waveshare 11.9inch Touch Monitor

16 Mbit, low voltage, Page-Erasable Serial Flash memory with byte alterability and a 50 MHz SPI bus interface, STM, SO8, RoHS

A compact camera module with a Sony IMX335 sensor, offering 5MP (2592 x 1944) resolution and 2K @ 30 FPS video support. Thanks to WDR technology and high low-light sensitivity, it delivers clear and detailed images in all conditions. The camera uses a 3.25mm M12 lens with a wide 91.7° viewing angle and minimal distortion, supports MJPG and YUY2 formats, and is plug & play thanks to the USB 2.0 interface. A built-in microphone enables audio recording, making it ideal for machine vision, surveillance, AI, and video conferencing systems. Waveshare IMX335 5MP USB Camera (C)

BMP390 is a compact, energy-efficient barometric pressure sensor with high accuracy, designed for precise altitude measurement and mobile applications. Thanks to its I2C/SPI interfaces and SMD mounting, it is widely used in embedded projects and wearable devices.

This camera features a 1-megapixel sensor and a global shutter. It records video at 1280x720 pixels at up to 120 fps, making it ideal for industrial, robotic, and research applications. Its wide-angle M12 (120°) lens without an IR filter ensures high image quality in various lighting conditions. Thanks to its USB Type-C interface and support for MJPG and YVY2 formats, the camera is easy to integrate with machine vision and AI systems. Waveshare OV9281 1MP USB Camera (A)

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252

USB-C to USB-C and 3.5 mm Jack adapter allows simultaneous charging and music listening on devices without an audio port. With a built-in DAC converter, it provides high sound quality and broad compatibility.

LCD 1x16, 122x33mm, LED backlight (yellow-green), enhanced temperature range, RoHS

Graphic LCD 122x32, LED backlight (negative blue), enhanced temperature range, PCB 80x36mm, RoHS

Silicone wire 22 AWG with tinned copper strands provides high flexibility and easy soldering in prototyping and servicing work. The yellow insulation facilitates routing and identification of wires in harnesses, and the 4 m length is sufficient for most workshop applications.

Silicone wire 22 AWG with tinned copper strands provides high flexibility and easy soldering in prototyping and servicing work. The white insulation facilitates routing and identification of wires in harnesses, and the 4 m length is sufficient for most workshop applications.

LoRa module based on Semtech SX1262 chip, supporting 868/915 MHz band and providing stable operation thanks to the use of TCXO. It is characterized by transmit power up to 22 dBm, receiver sensitivity -136.73 dBm and low power consumption, which makes it ideal for battery-powered IoT devices. Seeed Studio 114993390

A compact Meshtastic compatible device that combines LR1110, nRF52840 and Mediatek AG3335 GPS technologies for precise positioning and low power consumption. With IP65 waterproof, Bluetooth 5.0, Thread and Zigbee support and magnetic charging, it is ideal for outdoor activities and emergencies. Seeed Studio 114993369