A glass fuse with dimensions of 5x20mm and a current of 1.5A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

A set containing 840 pcs of colored connecting cables of various lengths, intended for connecting fields in contact plates. BBJ-840

ON-OFF switch supporting a maximum voltage of 250V at 6A AC. The life of the button is 10,000 cycles and it works in temperatures from -30 ° C to 85 ° C

The compact (0.4″ × 0.5″) D24V5F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 500 mA. Pololu 2845

IoT gateway module dedicated to industrial applications. It allows you to connect and manage different devices and systems through different communication protocols. USR-M100-ETH

ARM Cortex-M0 CPU, 64kB Flash, 8kB RAM, 2xUART, 2xI2C, 2xSPI, ADC, LQFP64, STM, RoHS

Female terminal block, 2-pin. Pitch 3.5mm. Height 7.8mm. Suitable for KF2EDGR male strips with a pitch of 3.5 mm. 2EDGKN-3.5

Small 9 DoF IMU module with 3-axis gyroscope and accelerometer (LSM6DSO) and 3-axis magnetometer (LIS3MDL). It is equipped with an I2C interface, a voltage stabilizer and a logic level converter. Pololu 2862

The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)

Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18083

Driver for three-phase BLDC motors based on the TMC6300 system from Trinamic. It allows you to control the movement of drives with a voltage of 2 to 11 V and a current consumption of up to 2 A. SparkFun ROB-21867

A set containing 560 pcs of colored connecting cables of various lengths, intended for connecting fields in contact plates. BBJ-560

Step-Up/Step-Down converter with an output voltage of 5 V, an input voltage from 3 to 15 V and a maximum current of up to 600 mA

BMS module for six Li-Ion cells with a voltage of 22.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 14 A

32-bit STM32F2 microcontroller with ARM Cortex-M3 core, 1MB Flash memory, 132kB RAM, 120MHz, CAN, Ethernet, I2C, IrDA, LIN, Memory Card, SPI, UART / USART, USB OTG, Brown-out Detect / Reset, DMA, I2S, LCD, POR, PWM, WDT, 1.8 ... 3.6 V, A / D 24x12b; D / A 2x12b, 100-LQFP

The protection system for four Li-Ion cells with a voltage of 14.8 V. The module has the function of charging the cells, discharging and protecting against excessive discharge. The cells can be discharged with a continuous current of up to 18 A

Power monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873

A development board that combines the u-blox NINA-B306 Bluetooth module, the ISM330DHCX 6DoF IMU sensor, and the BME280 atmospheric pressure sensor. It has a built-in Qwiic connector and LiPo battery connector as well as a charger and LiPo parameters monitor. SparkFun WRL-20854

A base that allows a simple connection to a MatesBUS compatible device. Facilitates prototyping by keeping the device at 35 degrees from the vertical. SparkFun PRT-19259