The module with the IMX230 sensor, working with all versions of the Raspberry Pi. The sensor used has a matrix of 21 MP and allows you to record video at resolutions of 5344x4012/9fps. ArduCAM B0324

8 Mpx camera module with IMX219 sensor and wide-angle "fisheye" lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0286

Camera module designed for minicomputers Raspberry Pi. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0270

Camera module with OV5647 sensor and movable IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 5 MPx. ArduCAM B0151

1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0224

A set with four cameras equipped with IMX219 sensors with a resolution of 8 MPx and an adapter for Raspberry Pi minicomputers. ArduCAM B0178

Adafruit 2269 - Bluefruit LE Sniffer - Bluetooth Low Energy (BLE 4.0) - nRF51822 - v1.0

FRAM chip has 64 Kbits (8 KBytes) of storage, interfaces using SPI, and can run at up to 20MHz SPI clock rates. Each byte can be read and written instantaneously (like SRAM) but will keep the memory for 95 years at room temperature. Adafruit 1897

Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273

Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214

Kit containing a module with two cameras with a sensor OV5647 with a resolution of 5 MP and an expansion module for NVIDIA Jetson Nano. ArduCAM B0217J5

Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181

Camera with OV9782 sensor designed for DepthAI systems. It is a replacement element for DepthAI OAK-D modules. ArduCAM B0352

Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a red nylon braid

TDA7393, 2x32W Dual bridge audio car amplifier, MULTIWATT15

Adafruit 2267 - Bluefruit LE Friend - Bluetooth Low Energy (BLE 4.0) - nRF51822

A set of conductive materials dedicated to device prototyping. DFRobot FIT0823

Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MDD10

2.4 "TFT LCD display module with touch panel with SD card slot. Resolution 240x320. Based on the ILI9341 controller. Powered by 3.3V or 5V.

RC extension cable dedicated to servos, comes with JR/Futaba female and male connectors. It has twisted wires