Piezoelectric vibration sensor with analog output, not loaded with mass, can be used as a vibration sensor. LDT0-028K/L

Akyga AK-AV-07 is a 3.0 m long VGA cable with a ferrite filter, used to transmit an analog signal in Full HD quality between devices with a 15-pin VGA connector. It is compatible with many standards including SVGA, XGA and NTSC. Akyga AK-AV-07

Module with addressed RGB diode WS2812B designed for Wemos D1 Mini boards

An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous currents up to 1.3 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4971

The bidirectional ESC controller enables precise control of brushed DC motors within a voltage range equivalent to 1S–2S Li-Ion/Li-Po packs. Its small size and compatibility with classic RC signals facilitate applications in compact mobile designs and robotic projects with limited mounting space

Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in blue. It communicates via the I2C interface. ModOLEDdisp0.66"I2Cblue

GPS module, SiRF4, 48 channels, SMD, SIMcom

A module with a PIR motion sensor, which has outputs for controlling 230 V LED lighting. ModPirSen

The Sunon EE40201SX-1000U-999 fan 40×40×20 mm offers high rotational speed and good cooling performance with low noise levels. By meeting the UL94V-0 and ECE R-118 flammability standards, it is suitable for use in electronics, automotive applications, and devices requiring compliance with strict safety regulations.

32bit ARm Cortex-M0, 96kB flash, 8kB SRAM, LQFP64, RoHS

DS18B20+, Programmable Resolution 1-Wire Digital Thermometer, TO-92-3

MS-DIP/SO2 PCB, SO8-SO28L to DIP8-DIP28 adapter

2 MP camera module with OV2311 sensor, compatible with Raspberry Pi. Without IR filter, equipped with shutter and M12 lens mount. Acrylic housing included. ArduCAM B0381

7-port HUB with USB 2.0 interface designed for use in industry. Enclosed in a metal case. With power supply. Waveshare USB-HUB-7U-EU

7-port HUB with USB 2.0 interface designed for use in industry. Enclosed in a metal housing. Waveshare USB-HUB-7U-NP

A compact servo controller based on the PCA9685 chip, allowing simultaneous control of up to 16 RC servos. The board features a built-in Edge Connector for direct connection to the micro:bit and Link-compatible pads for easy integration with other modules. Power can be supplied via the terminal block or servo connectors, and a built-in switch and LED simplify operation. The controller provides a stabilized 3.3V output for the micro:bit and additional devices, making it a perfect central module in your project. Kitronik 5694

Module with a color IPS LCD display with a diagonal of 1.3". It has a resolution of 240x240 pixels and an ST7789 controller. Communication with the module is realized via the SPI interface. Waveshare 1.3inch LCD Module

LED-AL-50U-W00140 emits UV radiation with a wavelength of 402 nm at a narrow 15° angle, providing high intensity in the illumination area. Thanks to its small 5 mm package, it is used in measurement, inspection, and decorative systems.

IGBT power transistor designed for high-efficiency switching applications such as motor control, power supplies, and DC/AC converters.