Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0025-Y

NFC module designed for Arduino. Meets the standards of reader mode, P2P mode and card emulation mode. The board has an integrated RF antenna. NXP OM5578/PN7150ARDM

Step-Down converter module with input voltage from 4.75 to 23V, output voltage from 1 to 17V and output current 1.8 A (3 A instantaneous current).

Tape with RGB LEDs WS2812B 1m long, 144 LEDs per meter, the diodes are mounted on a flexible white PCB. The diodes are not protected against water.

Angled male socket, wire-board type, for JST PH-2.0 wires, 5-pin, 2mm pitch, 100V, 2A. Set of 10 pieces

The SN74AHCT1G126DBVR is a single-input, three-state digital buffer ideal for bus and control applications. Compatible with TTL logic, it operates over a voltage range of 4.5V to 5.5V, making it suitable for systems with a variety of logic levels

350mW SURFACE MOUNT ZENER DIODE, SOT23-3, Diodes Incorporated, RoHS

Bluetooth audio receiver module that allows wireless transmission of sounds. It is equipped with a PCB antenna and a 3.5 mm Jack audio connector

Integrated gas sensor, pressure, humidity and temperature in the LGA-8 housing. Bosch Sensortec BME680

Bridge rectifier 1A / 1000V round, RoHS

NCD female plug, 4pin, 250V, with a latch, 2.54mm pitch

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 20V. PDC004

ARM7TDMI, 8kB Flash (ISP), 2kB RAM, 2xUART, I2C, SPI, SSP, ADC, LQFP48, RoHS

30 cm long tape, a knockout attempt for Raspberry Pi Zero series. Waveshare RPi Zero 2 W Camera Cable 30cm

The adapter that enables quick connection of two devices or cables with DC 5.5×2.1 mm sockets. Made of nickel-plated copper and PVC insulation, it ensures durability, connection stability, and safety of operation in installations powered by 12 V DC

A 20 cm long 4-pin cable with a JST XH2.5 female plug on one side

The SUNON 40x40x20mm axial fan is a reliable and quiet cooling device, with an efficiency of 9.3m³/h, power consumption of 0.38W, operating at a voltage of 4.5-13.8V, equipped with Vapo bearings and a brushless DC motor, emitting only 12.3dBA noise. Sunon HA40201V4-1000U-A99

Panel thermometer with a 7-segment LED display with a measuring range from -50 to 110 °C. It is powered with the voltage of 12 V

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CU-0025-BK

The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20