This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 16 A at 4.5 V to 40 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital output of a microcontroller.

The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.

Adafruit 402 - In-line wire 1-to-4 splitter

Module with 6 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4406

Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4441

Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4401

The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. SEN0189

32-bit microcontroller with ARM Cortex-M0 core + Access line ultra-low-power, 32 pins, 16kB Flash, 2kB RAM, 512B EEPROM, ADC, LQFP, temperature range -40 to 85 ° C, STMicroelectronics, RoHS

Module with 1 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4201

Adafruit 603 - Stainless Thin Conductive Yarn / Thick Conductive Thread - 35 ft

AVR ISP-MC USB 2,7-5,5V 16K-Flash TQFP32, Atmel

9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: RED. Adafruit 2947

Patchcord UTP 5E Ethernet cable with a length of 25 cm - gray, with 2xRJ45 connectors

128x64 graphic LCD display with LED backlight. Module with white background. Electronic Assembly DOGM128W-6

Dual Low-Voltage Power Amplifier, DIP08, STM, RoHS

A four-port USB 2.0 hub that allows data transfer at speeds up to 12Mbit / s. It has a black housing and a 45cm long cable

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for time-based projects). Adafruit 812