KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2

KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.

WiFi 802.11 b/g/n module with ESP8266 system, they have 22 edge terminals with 2 mm raster with the possibility of soldered gold connectors, 9 GPIO lines and 1 ADC line on the connector. Built-in PCB antenna. ESP-12E

SL-HEATSINK-85x40x10-AR is a black anodized aluminum heatsink designed for cooling SoMLabs SoM modules in embedded systems. Thanks to its low thermal resistance and simple installation, it provides efficient passive cooling in compact systems.

Module with digital thermal sensor, thermostat and I2C interface

Red plastic cap for the monostable button (Tact Switch). Fits switches with dimensions 12x12x7.3 mm

Module with adjustable voltage regulator LM317 with an output voltage in the range from 1.2 V to 37 V and a maximum current of 1.5 A

Green LED 1206, RoHS

Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.

KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV

The official HDMI cable - mini HDMI to Raspberry Pi with a length of 1 meter in white.

KAmod RS232S-mini is a miniature RS232 to TTL converter with a female DB9 connector, 2.54 mm goldpin pins, operating at 3-5.5 V, supporting all RS232 signals, based on the MAX3238/SP3238 chip, offering ESD protection up to 15 kV and corresponding to a DCE/Modem device

KAmodLPS25HB is a module that allows the measurement of atmospheric pressure in the range of 260-1260hPa with a resolution of 0.01hPa, and thanks to the embedded regulator and voltage translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V.

The PT4110E89E is an advanced step-up LED driver designed to power white LEDs in applications requiring stable current and high energy efficiency. It provides an output current of up to 1.5A at a supply voltage of up to 5.5V, making it an ideal solution for low input voltage LED lighting

The XL4015E1 converter is a step-down (buck) circuit that converts an input voltage of 8-36V to a regulated output of 1.25-32V, with a maximum current of up to 5A. It is characterized by high efficiency (up to 96%) and protection against short circuit and overheating, although it does not have protection against reverse polarity of the power supply.

KAmod I2C-Mini Out8 enables easy expansion of microprocessor systems with eight switching outputs for voltages and currents typical of low-voltage load control. Compatibility with the I2C bus and the ability to connect up to 8 modules in a single network make it an ideal solution for automation systems, lighting and power control, and other applications requiring flexible control of multiple circuits.

The KAmod JTAG to SWD Adapter provides a convenient interface between JTAG and SWD standards. Suitable for development and debugging environments requiring cross-compatibility between connector types.

3.5mm jack for stereo printing with switch, female, straight, THT, RoHS

The 4 mm black female banana connector is a universal electronic connector that provides a secure and quick connection in measuring and test devices