Finder 7M.24.8.230.0210 is a compact, bidirectional single-phase energy meter with RS-485 and NFC communication, designed for advanced energy consumption monitoring. It is used in photovoltaic installations, building automation, and energy management in distributed systems.

2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423

Finder 12.51.8.230.0000 is a digital time switch with daily and weekly programming options, designed for DIN rail mounting (35 mm width). It features a single-pole double-throw (SPDT) output with a 16 A load capacity at 250 V AC, allowing for precise control of electrical devices. Thanks to NFC technology, users can easily configure the device using a smartphone.

Finder 12.A1.8.230.0000 is a digital time switch with an astronomical function, designed for precise control of lighting and devices based on the sun\'s position. It is used in both outdoor and indoor installations where automatic control depending on daylight conditions is required.

Finder 12.61.8.230.0000 is a weekly time switch with one 16 A contact, designed for automating the operation of electrical devices and systems. It offers flexible programming options and can be configured both locally and via NFC.

Finder 95.55SPA is a relay socket with spring terminals, designed for DIN rail mounting, compatible with relays from series 40 and 44. Equipped with 8 pins with a 5 mm pitch, it ensures quick and secure connections in industrial applications.

Type 85.02 is a robust, multifunction time relay for industrial use, offering four timing functions, seven time ranges, and convenient DIN rail mounting.

Step-Up converter module with adjustable output voltage in the range from 3 to 30 V with a wide input voltage range from 2 to 24 V and a maximum output current of 4 A. The board is equipped with a USB connector

The camera set with the Sony IMX477 sensor allows you to remotely control zoom. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 12 MPx. ArduCAM B016712MP

Module with BDS/GNSS AT6558 receiver. It can receive data from six location systems simultaneously: GPS, GLONASS, Galileo, QZSS, SBAS and BeiDou. It communicates via the UART interface. DFRobot TEL0132

The module allows the measurement of lighting in the vicinity of the sensor. The measuring range is from 1 to 65535 LUX, and communication takes place using the I2C bus. DFRobot SEN0097

Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

Module with LCD TFT display with a diagonal of 1.8" and a resolution of 160x128 px. Communication via SPI interface. Waveshare Pico-LCD-1.8

Tic T500 USB Multi-Interface Stepper Motor Controller

LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116

Step-Down converter with input voltage up to 36 V which effectively reduces it to 3.3 V, while maintaining current up to 500 mA. Pololu 2842

DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. Polol 2133