Atmel 8-bit AVR Microcontroller with 2/4/8K Bytes In-System Programmable Flash, SOIC8, Atmel, RoHS

Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251

THT resistor, 0.25W, 5%, RoHS

Flexible RGB LED matrix display with 64x64 resolution (4096 LEDs). It has a HUB75 interface and can work with Raspberry Pi, Arduino or ESP32. Waveshare RGB-Matrix-P3-64x64-F

Advanced ESP32-based communication module with Wi-Fi and Bluetooth 4.2 support, equipped with LoRa SX1276 chip for long-range transmission in the 868 MHz band. Integrated NEO-6M GPS module and 0.96" OLED display enable real-time location and data viewing, and built-in 18650 cell cage provides mobility and energy independence. T-Beam V1.2 is ideal for projects based on mesh networks, providing reliable connectivity in field and IoT applications. LILYGO TTGO Meshtastic T-Beam V1.2

The board allows you to attach cables to the microSD / TF card line. Supply voltage from 2.7 to 3.6 V. Polol 2597

BOB-12009

Portable 8" monitor with touch panel. Equipped with HDMI for video display and USB Type C for touchscreen operation. It offers 2K resolution (1536x2048 px). Waveshare 8inch 1536x2048 LCD (EU)

A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with soldered connectors. Pololu 5064

The SN65HVD230D chip is a reliable CAN interface for systems requiring stable data transmission with high noise immunity. Thanks to its compact SOIC-8 package and compatibility with 3.3 V supplies, it performs excellently in embedded applications, automotive systems, IoT devices and industrial controllers.

A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with connectors for mounting. Pololu 5065

Rotary encoder that enables precise detection of direction and number of revolutions using digital pulses. Equipped with an integrated button, five pins (CLK, DT, SW, VCC, GND) and a metal knob, it is ideal for user interfaces and device control. Thanks to its compatibility with Arduino and Raspberry Pi, durability up to 20,000 cycles and simple integration, it is suitable for educational and DIY projects. KY-040

A module that provides galvanically isolated, bidirectional I²C communication and isolated power supply, protecting devices from misconnections and voltage differences. Thanks to the TI ISO1640B device, it supports data transfer up to 1.7 MHz, and the power supply isolation via MPS MIE1W0505BGLVH eliminates ground loops and interference. Pololu 5393

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. Pololu 2507

Double ESD protection diodes, SOT23 (TO-236AB), NXP, RoHS

A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with soldered connectors. Pololu 5066

LCD display 2x16, 80x36mm, LED backlight (RED), mark 4.24mm, RoHS. ART016002E33-DIR-R

A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with connectors for assembly. Pololu 5067