Category: Main categories

Camera module with Sony Starvis IMX290 sensor that works with Raspberry Pi minicomputers. It has a 2 MP sensor and an 80° viewing angle lens, and is equipped with a movable IR-CUT filter. ArduCAM B0424

Development kit with an SoC containing eight 64-bit ARM v8.2 cores and a Volta graphics chip consisting of 512 cores supporting CUDA, cuDNN and TensorRT technologies. Equipped with 32 GB RAM and 128 GB SSD drive. Auvidea X221D-AGX32-128GB

A base board dedicated to Raspberry Pi CM4 modules. It is equipped with two RJ45 connectors, USB 2.0 and a microSD slot. In addition, there is a fan connector on the board. Waveshare CM4-DUAL-ETH-MINI-BOX (EU)

A kit for building a NAS server with a Raspberry Pi CM4 module (1.5GHz 4GB RAM 8GB eMMC WiFi/Bluetooth). It has space to mount two 2.5" SATA drives and an LCD display to monitor the minicomputer\'s operating status. Waveshare CM4-NAS-Double-Deck-C4A (EU)

The main MicroMod module with the iMXRT1062 microcontroller known from the popular Teensy boards. It has built-in additional protection against reading the program. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-18771

A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with connectors for assembly. Pololu 5067

A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with soldered connectors. Pololu 5066

A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with connectors for mounting. Pololu 5065

Female terminal block, 7-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-7P

Female terminal block, 16-pin. Pitch 3.81mm. Height 11.1mm. 15EDGK-3.81-16P

The official camera module designed to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 75 ° with autofocus. Version without IR filter. Raspberry Pi SC0873

Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008

Official camera module set to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 120 ° with autofocus. Raspberry Pi SC0874

The official camera module designed to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 75 ° with autofocus. Version without IR filter. Raspberry Pi SC0875

Camera for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI socket. The camera is equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Raspberry Pi HQ Camera

The charger is designed for 1S and 2S LiPo batteries. It is powered by a USB type C connector. ISDT UC2

DC motor with 1:48 plastic gearbox. equipped with incremental encoder with Hall sensors. Includes bracket, mounting hardware and cord

A module with 8 PC817 optocouplers. Allows you to add galvanic separation in the form of opto-isolation between electrical circuits

Isolated RS485 module with signal amplifier function. Designed for communication within industrial networks

ADC converter module with 7 measurement channels (measuring 0-5V, 0-10V voltage and 4-20 mA current). Communicates via RS485 industrial interface using Modbus RTU protocol. R4AVA07