Category: Main categories

COM-11274 Button, 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch

Programmable coin acceptor with memory for 3 types of coins. It uses the thickness, diameter and fall time of the coins for identification. Programming is done using buttons and a 7-segment display on the side of the device. SparkFun COM-11719

Programmable coin acceptor with memory for 6 types of coins. It uses the thickness, diameter and fall time of the coins for identification. Programming is done using buttons and a 7-segment display on the side of the device. SparkFun COM-11636

An OEM version of the measurement system for PHM/SHM applications, creating a complete, autonomous measurement system node, equipped with a network interface. The system consists of a base board and a computing module. The measurement front-end of the base plate is equipped with AI/ML that serves as a configurable sample preselector.

The design is optimized for cooperation with computing modules based on Renesas RZ/V2L processors

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002

A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386

GNSS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-21305

Active GNSS antenna u-blox ANN-MB1 multi-band dedicated to precise location determination. It offers support for the L1, L5, E5a, B2a and NavIC bands and is equipped with a 5-meter antenna cable with an SMA connector. SparkFun GPS-23814

Compact helical antenna designed to receive GNSS/GPS signals in the L1, L2 and L5 bands. It is compatible with GPS, GLONASS, Galileo and BeiDou systems and is ideal for mobile and aviation applications. SparkFun GPS-23847

Camera module with Sony IMX219 sensor designed for Raspberry Pi 5 users. It offers a resolution of 8 MP (3280 x 2464 pixels) and a wide viewing angle of 120°. Comes with FPC CSI tape. Waveshare Pi5-IMX219-120

Module with an analog TEMT6000 light intensity sensor. The output voltage increases with increasing intensity of the incident light. The sensor is powered by 5 V. SparkFun BOB-08688

RM500U-CNV module with M.2 connector. It supports communication within 5G, 4G and 3G networks. Waveshare RM500U-CNV

COM-11275 Button, 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1502

Graphic LCD 128x64 with 20-pin connector and LED backlight (green). SparkFun LCD-00710

4-channel USB-RS485/RS422 converter dedicated to industrial applications. It provides communication between the USB interface and the RS485 and RS422 serial standards. It uses the FTDI FT4232HL chip, which ensures stable and interference-resistant communication. Waveshare USB TO 4CH RS485/422

USB dongle with 5G module RM520N-GL. It is equipped with a USB 3.1 type A port that allows you to add 5G network communication to a PC, Raspberry Pi or Jetson Nano. It uses 4 antennas and can operate in all regions on the globe. Waveshare RM520N-GL 5G DONGLE

A set with the Quectel RM520N-GL module designed to connect 5G communication via an Ethernet or USB3.1 connector. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G M.2 TO ETH (EU)

Expansion board with 5G module RM520N-GL dedicated to NVIDIA Jetson Nano minicomputers. The module supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. It also offers the ability to support GNSS positioning systems, including GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare RM520N-GL 5G for Jetson Nano (EU)

5G Sub-6GHz module optimized for IoT/eMBB applications. It supports 5G non-standalone (NSA) and standalone (SA) modes. It has an integrated high-precision multi-band GNSS receiver with support for GPS, GLONASS, BDS and Galileo positioning systems. It is equipped with an M.2 B Key connector. Waveshare RM530N-GL