zł701.68 tax excl.
development and prototyping platform for the LARA-R6 LTE Cat 1 module from u-blox. The LTE Stick uses the LARA-R6401 version, which supports both data and voice for North America and works with the LTE bands used by AT&T, Verizon, T-Mobile and FirstNet networks. SparkFun CEL-23618
The SparkFun LTE Stick is a development and prototyping platform for the u-blox LARA-R6 LTE Cat 1 module. The LTE Stick uses the LARA-R6401 version, which supports both data and voice calls for North America and operates on the LTE bands used by AT&T, Verizon, T-Mobile, and FirstNet networks. The board includes a nanoSIM socket, allowing users to choose their preferred network. The LARA-R6 module supports multiple LTE FDD frequency bands (2, 4, 5, 12, 13, 14, 66, and 71) and offers a range of features typical for u-blox modules, including uFOTA (firmware update over the air), Root of Trust, secure boot/update, jamming detection, antenna and SIM card detection.
The LTE Stick exposes UART and I2S interfaces on a 2.54 mm header along with Reset and Power On signals. The board is designed specifically for mounting on a breadboard, making prototyping easier. The board has two SMA connectors for the LARA-R6 module's main and auxiliary antennas. The main antenna transmits and receives data, while the auxiliary antenna only receives data. Power to the board is provided through a USB Type-C connector (recommended) or a VIN PTH pin (max. 6V). Additionally, the board includes test points for advanced users to solder the I2C interface, a second UART interface, and four GPIO pins (IO1, IO2, IO3, and IO6).
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
No product available!
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Molex LTE/5G external cellular antenna designed for 2G/3G/4G/5G modules and devices. Offers excellent coverage and reliability with high performance and gain. SparkFun CEL-16432
No product available!
Wio development kit equipped with LTE 4G communication and a GNSS satellite navigation module. Seeed Studio 102991022
4G/3G/2G communication and GNSS positioning module. It allows you to make phone calls, support SMS, MMS, e-mail, TCP, UDP, DTMF, HTTP, FTP and has support for GPS, BeiDou, Glonass, LBS. Waveshare SIM7600G-H 4G for Jetson Nano
Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT
No product available!
Expansion board with LTE Cat-1, 2G GSM/GPRS and LBS module, designed to work with Raspberry Pi minicomputers. Waveshare A7670E Cat-1 HAT
No product available!
The module is equipped with the LTE-M/NB-IoT u-blox SARA-R510M8S system. It allows you to monitor devices remotely. SparkFun GPS-18031
No product available!
5G/4G/3G and GNSS module with SIM8200EA-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8200EA-M2 5G for Jetson Nano (EU)
No product available!
5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)
No product available!
Communication module with the system SIM7000G designed for minicomputers Raspberry Pi. Adds NB-IoT, eMTC, EDGE, GPRS and GNSS support. Waveshare SIM7000G NB-IoT HAT (EN)
Cat 4 LTE module that supports LTE-TDD, LTE-FDD, HSPA +, GSM, GPRS and EDGE wireless communication. It is equipped with a Mini-PCIe interface. Waveshare SIM7600G-H-PCIE
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
No product available!
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
No product available!
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (EU)
No product available!
RM500Q-AE module with M.2 connector. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-AE
No product available!
RM500Q-GL module with M.2 connector. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL
No product available!
RM502Q-AE module with M.2 connector. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE
No product available!
development and prototyping platform for the LARA-R6 LTE Cat 1 module from u-blox. The LTE Stick uses the LARA-R6401 version, which supports both data and voice for North America and works with the LTE bands used by AT&T, Verizon, T-Mobile and FirstNet networks. SparkFun CEL-23618