USB-CAN-FD - 2-channel USB adapter - CAN/CAN FD
ID: 1186272
zł382.87
Tax included
zł311.28 tax excl.
2-channel USB to CAN/CAN FD adapter with CAN protocol analyzer function. Supports decoding of CAN 2.0A, CAN 2.0B, ISO11898-1 and CAN FD V.1.0 standards. Dedicated to industrial applications. Waveshare USB-CAN-FD
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
USB-CAN-FD is a professional USB adapter for the CAN FD bus with a data analyzer function. It offers the highest level of performance, two independent CAN FD interface channels with electrical isolation and a number of protection systems. The CAN transmission rate can be configured from 100 Kb/s to 5 Mb/s. Supports baud rate calculation, automatic detection and setting via configuration tool. The adapter supports the CAN 2.0A, CAN 2.0B, ISO11898-1 standards and the CAN FD V.1.0 protocol specification, including standard and extended frames.
The device can be connected to a personal computer or host via a USB port, enabling transceiver control, data analysis, and CAN/CAN FD network collection and monitoring. Thanks to its compact dimensions and simplicity of use, it is perfect for learning and debugging the CAN/CAN FD bus, as well as for software development and integration into various industrial applications that require communication via the CAN/CAN FD bus. Thanks to support for Windows XP/7/8/10/11 and provided drivers, CAN FD Tools and examples for various programming platforms (C#, VC, Delphi, Qt, LabVIEW, Python/Python-Can), using this adapter becomes easy and intuitive.
Features
- Dual channel: CAN1 and CAN2 (independent and isolated)
- Full power and signal isolation, 3000V DC, electrostatic discharge ± 8KV
- Screw terminal for CAN bus
- Each CAN channel has two built-in 120Ω termination resistors that can be turned on with a switch
- Transmission speed: 100 kbps to 5 Mbps
- Supported protocols: CAN2.0A, CAN2.0B, and ISO 11898-1 CAN FD protocol V.1.0
- LED indicator: power, TX, RX
- Aluminum alloy housing
- USB Type B connector
- Operating system support: Windows XP/7/8/10/11
- Power supply: 5V
- Operating temperature: -40 to 85℃
- Dimensions: 104 x 70 x 25 mm
Kit contains
- USB-CAN-FD adapter
- USB Type A to USB Type B cable
- 4-pin cable
- Screwdriver
1186272
You might also like
USB - CAN converter module. It allows the device to be connected to a computer (USB) or microcontroller (UART) via the CAN bus. USB CAN CONVERTER (UCCB)
zł81.90
Delivery date unknown
No product available!
2-channel USB-CAN adapter with CAN protocol analyzer function. Dedicated to industrial applications. Waveshare USB-CAN-B
zł480.46
24h
Available quantity: 8
Available
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A
zł101.19
24h
Available quantity: 34
Available
Other products in the same category (16)
TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter
zł199.90
24h
Available quantity: 4
Available
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł40.90
24h
Available quantity: 5
Available
USB - LIN bus converter module. It allows you to connect devices to your computer via the LIN bus. LIN USB CONVERTER (LUC)
zł89.90
Delivery date unknown
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł49.90
24h
Available quantity: 175
Available
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A
zł101.19
24h
Available quantity: 34
Available
Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150
zł104.82
24h
Available quantity: 2
Available
CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface
zł18.91
24h
Available quantity: 22
Available
USB - CAN converter module. It allows the device to be connected to a computer (USB) or microcontroller (UART) via the CAN bus. USB CAN CONVERTER (UCCB)
zł81.90
Delivery date unknown
No product available!
2-channel USB-CAN adapter with CAN protocol analyzer function. Dedicated to industrial applications. Waveshare USB-CAN-B
zł480.46
24h
Available quantity: 8
Available
UART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus
zł4.46
24h
Available quantity: 100
Available
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN
zł46.01
24h
Available quantity: 5
Available
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
zł109.90
24h
Available quantity: 9
Available
USB - LIN bus converter module. It allows you to connect devices to your computer via the LIN bus. LIN USB CONVERTER (LUC)
zł104.89
24h
Available quantity: 19
Available
The CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085
zł74.05
24h
Available quantity: 3
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł116.83
6 weeks
No product available!
Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0
zł49.90
24h
Available quantity: 10
Available
2-channel USB to CAN/CAN FD adapter with CAN protocol analyzer function. Supports decoding of CAN 2.0A, CAN 2.0B, ISO11898-1 and CAN FD V.1.0 standards. Dedicated to industrial applications. Waveshare USB-CAN-FD