OBD-II CAN-BUS Development Kit
ID: 583191
5906623486519
zł104.00
Tax included
zł84.55 tax excl.
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
Description
OBD-II CAN-BUS Development Kit is a set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. CAN Bus module can be connected to any evaluation kit, incl. Arduino, Raspberry Pi or Beaglebone using the UART interface. The kit includes the Arduino library, which makes it much easier to start working with the kit, as well as documentation and a sample project. OBD-II CAN-BUS Development Kit is an excellent tool for any hobbyist who would like to learn about the operation of the OBD II system.
OBD-II (short for On-Board Diagnostics, Second Generation) is a built-in vehicle self-diagnosis system. It allows you to accurately identify your vehicle's problem by connecting a 16-pin OBD-II reader and reading OBD-II codes, known as Diagnostic Trouble Codes (DTCs), which are helpful in understanding problems without having to completely disassemble the vehicle.
Features
- Fast communication up to 1 Mb/s
- Easy setup
- Support for multiple platforms, incl. Arduino, Raspberry Pi, Beaglebone etc.
- LED for power, status, transmit and receive
- The connector is compatible with the ODB II standard
- UART interface for communication with the microcontroller
- Dimensions: 110 x 83 x 43 mm
- Weight: 71.5 g
Kit contains
- CAN Bus module
- OBD II connector
- Screwdriver
- CAN Bus cable
- Grove cable
583191
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 41
Available
Other products in the same category (16)
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074
zł64.23
24h
Available quantity: 3
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł35.89
24h
Available quantity: 1
Available
Grove starter kit dedicated to Raspberry Pi minicomputers. Contains basic sensors and modules necessary for learning programming and electronics. Seeed Studio 110020169
zł261.47
24h
Available quantity: 1
Available
Transceiver module equipped with SoC ESP8285 IoT enabling communication with WiFi networks. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020011
zł71.75
24h
Available quantity: 1
Available
The expansion module is designed for Arduino Nano boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100124
zł18.04
4 weeks
No product available!
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000
zł28.33
4 weeks
No product available!
Set for speech recognition compatible with Arduino. It consists of the Base Shield V2 expansion module, the voice command recognition module, the audio module and the necessary accessories. Seeed Studio 110020108
zł246.95
24h
Available quantity: 2
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 5°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020894
zł360.69
4 weeks
No product available!
Module with tact switch button. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020003
zł8.19
24h
Available quantity: 4
Available
The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555
zł82.45
24h
Available quantity: 2
Available
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
zł52.19
4 weeks
No product available!
Module with a light sensor based on the APDS-9002 system. With the aid of this system, it is possible to measure the intensity of illumination in lux. The module has a connector in accordance with the Grove standard. Seeed studio 101020076
zł34.22
4 weeks
No product available!
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
zł24.54
24h
Available quantity: 2
Available
Module with SSR M281 relay with a load of up to 1 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 101020603
zł31.92
24h
Available quantity: 2
Available
A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006
zł97.67
24h
Available quantity: 5
Available
Module with LCD display 16x2 characters with RGB backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104030001
zł99.68
24h
Available quantity: 2
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438