New products
New products
Available
Available
Available
Available
Available
Available
USB-CAN-A - USB - CAN adapter
ID: 1182967
5906623427093
zł87.38
Tax included
zł71.04 tax excl.
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A
Description
USB-CAN adapter in the form of a small device with a USB type A connector in the shape of a flash drive. It allows communication via CAN bus between a computer and industrial equipment for testing, development or data analysis. It supports CAN2.0A (standard frame) and CAN2.0B (extended frame) standards with CAN transmission rates ranging from 5Kbps to 1Mbps. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers.
The device can operate in one of four operating modes: normal mode, loopback mode, silent mode, silent loopback mode. This provides great flexibility and versatility of operation. It supports various modes of sending and receiving data, including as a single frame, multiple frames, manual, regular and cyclic sending. It can be configured to receive data only from a specific ID or specify an ID to automatically respond to data.
The module is compact in size and easy to use. It is based on the STM32F103 microcontroller and is equipped with surge protection. It can be used for development and integration into various industrial communication and intelligent control applications that require CAN bus communication. Full documentation and usage examples are available on the product page.
Features
- Supports CAN2.0A (standard frame) and CAN2.0B (extended frame)
- CAN baud rate is configurable from 5Kbps to 1Mbps
- Supports 4 operating modes: normal mode, loopback mode, silent mode, silent loopback mode
- Supports multiple CAN data sending modes: single frame, multiple frames, manual, regular and cyclic sending
- Supports multiple CAN data receiving modes: can be configured to receive data from a specific ID only, or specify an ID to automatically respond to the configured data
- Data can be saved as TXT or Excel
- Supports CAN bus detection to check status
- Sending/receiving CAN data with time scale, allows sequential display
- USB virtual COM port baud rate is configurable from 9600 to 2000000bps (default is 2000000bps)
- Supports setting the operation parameters by configuration software or commands
- Based on STM32F103
- Built-in TVS (Transient Voltage Suppressor) diode to effectively suppress surges
- Works with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers
- Dimensions: 79.8 x 14.5 mm
Kit contains
- USB-CAN-A module
- USB cable 1.5 m
- Screwdriver
1182967
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.99 Delivery date unknown No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł277.00 24hAvailable quantity: 166 Available2-channel USB-CAN adapter with CAN protocol analyzer function. Dedicated to industrial applications. Waveshare USB-CAN-B
zł484.53 24hAvailable quantity: 6 Available
Other products in the same category (16)
I2C-CAN converter using the MCP2551 and MCP2515 systems and the ATmega168PA microcontroller. The module uses the I2C bus and the Grove connector for communication. Seeed Studio 113020111
zł97.43 24hAvailable quantity: 1 AvailableIndustrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH
zł311.66 4 weeks No product available!
TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter
zł199.90 24hAvailable quantity: 3 AvailableKAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90 24hAvailable quantity: 147 AvailableExpansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0
zł49.90 24hAvailable quantity: 6 AvailableRS232/485/422 to CAN converter enabling conversion and communication between RS232, RS485, RS422 interfaces and the CAN interface. It supports the Modbus RTU protocol, has numerous built-in protections, and the metal housing facilitates installation in an industrial environment. Waveshare RS232/485/422 TO CAN
zł130.71 24hAvailable quantity: 7 AvailableThe USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
zł119.90 24hAvailable quantity: 9 AvailableUSB - CAN converter module. It allows the device to be connected to a computer (USB) or microcontroller (UART) via the CAN bus. USB CAN CONVERTER (UCCB)
zł81.91 Delivery date unknown No product available!
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN
zł47.75 24hAvailable quantity: 3 Available2-channel USB to CAN/CAN FD adapter with CAN protocol analyzer function. Supports decoding of CAN 2.0A, CAN 2.0B, ISO11898-1 and CAN FD V.1.0 standards. Dedicated to industrial applications. Waveshare USB-CAN-FD
zł383.55 24hAvailable quantity: 6 AvailableA set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł109.20 24hAvailable quantity: 3 AvailableAn extensive CAN to Ethernet converter adapted to difficult industrial conditions. It supports two CAN interfaces, one Ethernet interface and a TCP/IP protocol stack. It also has one RS485 serial port. USR-CANET200
zł270.02 24hAvailable quantity: 10 AvailableCAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708
zł21.82 24hAvailable quantity: 10 AvailableKAmod CAN-TXRX is a CAN bus transceiver with the MCP2542FD system, compatible with the CAN 2.0 and CAN FD standards, enabling sending and reading data with the serial interface voltage level adjustable in the range of 1.7...5 V, equipped with protections and LEDs signaling action
zł36.70 24hAvailable quantity: 120 AvailableCANable V2.0 PRO is a USB-C to CAN adapter with galvanic isolation. It supports CAN 2.0 and CAN FD, ensuring reliable communication and broad compatibility. MKS CANable V2.0 PRO
zł131.50 6 weeks No product available!
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł43.90 24hAvailable quantity: 54 Available
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A