WS-TTL-CAN - UART TTL to CAN converter
ID: 1189000
5906623424115
zł47.75
Tax included
zł38.82 tax excl.
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
UART-CAN converter module with a built-in microcontroller (MCU) and a CAN transceiver system. The implemented conversion algorithm allows for simple configuration and supports the CAN 2.0A (standard frame) and CAN 2.0B (extended frame) standards. It has 14 sets of configurable filters, allowing it to only receive data within a specific range and type on the CAN bus. The converter supports 4 operating modes: transparent conversion, transparent conversion with identifiers, format conversion and Modbus RTU protocol conversion. In addition, it has a built-in CAN buffer to prevent data loss during transmission. The device software is updated via the TTL interface, which facilitates, among others: adapting functions to individual needs. The pins of the system are available on goldpin pins with a standard 2.54 mm pitch, and the converter works with voltages of 3.3 V. It is a good choice when designing and prototyping devices based on the CAN bus.
Features
- 32-bit MCU
- CAN communication: supports CAN2.0A (standard frame) and CAN 2.0B (extended frame)
- ESD protection and surge protection
- CAN baud rate: 10Kbps to 1000Kbps
- TTL operating voltage: 3.3V
- TTL baud rate: 1200 bps to 460800 bps
- Built-in module operation indicator
- Reset/factory reset
- Power supply: 3.3V
- Current consumption: 40 mA
- Operating temperature: -40 to 85℃
- Operating humidity range: 5 to 95% relative humidity
- Dimensions: 19 x 17.3 mm
1189000
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
CP2102 USB to UART Module, USB micro connector
zł21.89 24hAvailable quantity: 18 AvailableA set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.01 24hAvailable quantity: 466 AvailableA set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.19 24hAvailable quantity: 302 AvailableA set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.87 24hAvailable quantity: 69 AvailableUSB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246
zł70.25 Delivery date unknown No product available!
Industrial grade USB-UART TTL converter. Equipped with a number of security features ensuring stable and safe communication. Waveshare USB TO TTL (B)
zł23.67 24hAvailable quantity: 12 Available
Other products in the same category (16)
The module is based on the GD32E103 microcontroller, supporting CAN FD at up to 5 Mbps, making it ideal for automotive and automation applications. With AT command support, Grove connector and compatibility with XIAO RP2040 boards, the module offers easy integration in IoT projects such as monitoring or automation. Seeed Studio 114992978
zł34.23 24hAvailable quantity: 3 AvailableIndustrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH
zł320.06 24hAvailable quantity: 2 AvailableRS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
zł45.13 24hAvailable quantity: 17 AvailableA set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł114.67 24hAvailable quantity: 1 AvailableThe CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085
zł74.05 24hAvailable quantity: 3 AvailableCAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708
zł21.82 24hAvailable quantity: 14 AvailableThe USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
zł109.90 Delivery date unknown No product available!
CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface
zł22.37 24hAvailable quantity: 11 AvailableUART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus
zł4.32 6 weeks No product available!
Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150
zł105.44 24hAvailable quantity: 2 Available2-channel USB to CAN/CAN FD adapter with CAN protocol analyzer function. Supports decoding of CAN 2.0A, CAN 2.0B, ISO11898-1 and CAN FD V.1.0 standards. Dedicated to industrial applications. Waveshare USB-CAN-FD
zł383.55 24hAvailable quantity: 7 AvailableKAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł49.90 24hAvailable quantity: 154 AvailableCANable V2.0 PRO is a USB-C to CAN adapter with galvanic isolation. It supports CAN 2.0 and CAN FD, ensuring reliable communication and broad compatibility. MKS CANable V2.0 PRO
zł131.50 6 weeks No product available!
Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0
zł49.90 24hAvailable quantity: 6 AvailableThe CAN-BUS Arduino Shield v2.0 can be stacked on an Arduino UNO, Arduino Leonardo or Arduino MEGA board. The shield integrates an MCP2515 CAN-BUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device. There is also an integrated MicroSD socket for data storage. DFR0370
zł107.08 24hAvailable quantity: 2 AvailableAn extensive CAN to Ethernet converter adapted to difficult industrial conditions. It supports two CAN interfaces, one Ethernet interface and a TCP/IP protocol stack. It also has one RS485 serial port. USR-CANET200
zł266.00 4 weeks No product available!
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN