RFID Expansion - module with RFID reader for micro:bit
ID: 1178338
5906623413768
zł115.60
Tax included
zł93.98 tax excl.
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
Description
Module with RFID reader designed to work with micro:bit. It works at a frequency of 125 kHz and allows you to read the ID information stored on the key ring and RFID tags. The board is equipped with a buzzer and PWM outputs that allow you to control two servos. Communication with the RFID reader is realized via the UART interface. It will be used as an element of room access control systems, elements of identification systems. Full documentation with examples is available on the product wiki page.
Pinout
Features
- UART communication interface
- Supports 125kHz key fobs and tags
- Programmable buzzer
- Two PWM outputs for servo control
- UART baud rate: 9600 bps
- Control voltage: 5V
- Dimensions: 68 x 56 mm
Kit contains
- micro:bit RFID Expansion
- RFID card
- RFID key ring
1178338
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 18
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł94.89
Delivery date unknown
No product available!
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables. SparkFun KIT-17362
zł321.01
Delivery date unknown
No product available!
Other products in the same category (16)
The expansion module is designed for micro:bit sets. Offers a simple, beginner-friendly robotics controller. SparkFun DEV-15713
zł421.69
24h
Available quantity: 1
Available
The module with six touch buttons and LED diodes is designed for micro:bit. It uses the CAP1166 driver and communicates via the I2C interface. Pimoroni PIM401
zł66.19
24h
Available quantity: 2
Available
Transparent case made of tinted plastic, designed for micro:bit educational modules. Adafruit 4852
zł16.29
24h
Available quantity: 2
Available
Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16446
zł35.46
24h
Available quantity: 1
Available
The expansion module is designed for micro:bit board. Controller: bit offers a fully functional controller module with a design based on a classic Nintendo controller. SparkFun DEV-16129
zł88.65
24h
Available quantity: 2
Available
Expansion module (outputs expander) dedicated to the micro: bit board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3928
zł193.09
24h
Available quantity: 1
Available
The IO expansion module is designed to work with the micro:bit educational board. There are 20 IO pins on the board, a buzzer, audio output and voltage stabilization circuit
zł29.89
4 weeks
No product available!
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano
zł62.74
24h
Available quantity: 1
Available
The expansion module is designed for micro:bit v2. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100063
zł58.30
24h
Available quantity: 1
Available
Soil moisture sensor dedicated to micro:bit. It is supplied with the voltage from 3.3 V to 5 V and communicates via an analog signal. SparkFun SEN-15272
zł48.84
24h
Available quantity: 3
Available
Audio module with loudspeaker designed to work with micro:bit. There is an amplifier and an 8 Ω 2 W speaker on the board. Pimoroni PIM356
zł82.73
24h
Available quantity: 2
Available
Edge Breakout for micro: bit is an expansion board for the micro: bit module. It offers leaded I / O pins on a 3 x 25 pin gold pin connector. There are available anlog entries, GPIO pins, I2C and SPI interfaces, as well as power pins. Edge Breakout for micro: bit
zł42.05
4 weeks
No product available!
Kitronik 5644 is a programmable gamepad-style controller designed for the micro:bit, enabling enhanced gaming experiences and remote control of other devices via the micro:bit’s radio communication. It features six buttons, a built-in buzzer for sound signals, and a vibration motor for haptic feedback.
zł77.18
24h
Available quantity: 9
Available
The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118
zł84.48
24h
Available quantity: 1
Available
Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16445
zł35.29
24h
Available quantity: 1
Available
Expansion board for micro:bit modules with connectors compatible with Boson and Gravity sets. DFRobot DFR0521
zł41.93
24h
Available quantity: 1
Available
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291