.png)
Environment Science Expansion Board V2.0 - module with environmental sensors for micro:bit
ID: 586402
5906623406982
zł566.53
Tax included
zł460.59 tax excl.
Extension module with environmental sensors designed for micro: bit. Can be programmed with MakeCode or Mind+. DFRobot MBT0034
Description
Expansion module with environmental sensors designed for micro:bit. The PCB has an integrated sensor for UV, temperature, humidity, air pressure, sound, light, water temperature and water quality TDS (Total Dissolved Solids), soil moisture sensor, TVOC and a CO2 sensor.
The board was designed with STEAM education in mind. It enables students to measure environmental parameters useful for scientific experiments with an extensive array of sensors. This helps them to explore and understand the natural phenomena found in their everyday environment. The kit aims to provide students with a platform for learning science theory combined with hands-on exercises.
Features
- ML8511 UV sensor
- Working temperature: -20 ℃ to 70 ℃
- Measurement of UV-A, UV-B radiation
- Wavelength: 280 to 390nm
- BME280 environmental sensor
- Working current: 2 mA
- Working temperature: -40 ℃ to 85 ℃
- Temperature measurement range: -40 ℃ to 85 ℃, resolution 0.1 ℃, error ± 0.5 ℃
- Humidity measuring range: 0 to 100% RH, resolution 0.1% RH, error ± 2% RH
- Humidity measurement response time: 1 s
- Atmospheric pressure measuring range: 300 to 1100 hPa
- Waterproof temperature sensor
- Temperature measurement range: -10 ℃ to 85 ℃, error ± 0.5 ℃
- Operating temperature range: -55 ℃ to 125 ℃
- Inquiry time: less than 750 ms
- TDS water quality sensor
- The TDS probe should not be used in water hotter than 55 ℃
- The TDS probe should not be placed too close to the edge of the container
- Air quality sensor CCS811
- Operating temperature range: -40 ℃ to 85 ℃
- Operating humidity range: 10% RH to 95% RH
- CO2 measurement range: 400ppm to 8000ppm
- TVOC measurement range: 0ppb to 1100ppb
- Capacitive soil moisture sensor
- Supply voltage: 3.3 V to 5.5 V DC
- Output voltage: 0 to 3V DC
- Connector: PH2.0-3P
- Dimensions: 98 x 23 mm
- RGB LED
- RGB LED: WS2812
- Port: P15
- Light sensor
- Analog output
- Data range: 0 to 1023
- Buzzer
- Diameter 9 mm
- Passive buzzer
- Port: P0
- Sound sensor
- Analog output
- Data range: 0 to 1023
- OLED display
- Dimension: 0.96 inch
- Display color: blue
- Resolution: 128 x 64 px
- Refresh rate: 60 fps
- Brightness: 60 (typ.) Cd / m2
- Current consumption: approx. 22.75 mA
- Working temperature: -30 ℃ to 70 ℃
- Display area: 21.744 x 10.864 mm
- Motor control
- PWM signal
- Compatible motor: Low power DC motors such as N20 gear motor and 130 gear motor
- Wi-Fi IoT
- Wireless communication: IEEE802.11b/g/n
- Encryption type: WPA WPA2 / WPA2-PSK
- Frequency: 2.4 GHz
- Built-in protocol: TCP/IP stack
- Supported IoT platform: EasyIoT, IFTTT, ThingSpeak, SIoT
- LED indicator:
- Red: disconnected
- Blue: connecting
- Green: Connected
- Development platform: MakeCode, Mind +
- Power supply: micro USB (5 V), 3 x AAA battery (4.5 V)
- Dimension: 196 x 110.6 mm
Kit contains
- Environment Science Expansion Board V2.0
- Capacitive soil moisture sensor
- TDS water quality sensor probe
- Waterproof temperature sensor
586402
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Maxell AAA battery (R3, LR03, small) 1 piece, 1.5V, capacity 1200mAh
zł1.89
24h
Available quantity: 25
Available
GP Super AAA battery (R3, LR03, small) 6 pieces, 1.5V
zł16.90
Delivery date unknown
No product available!
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł73.90
24h
Available quantity: 22
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł97.96
24h
Available quantity: 6
Available
Other products in the same category (16)
Micro: Circular RGB LED is an expansion board designed for use with the micro: bit module. It has been equipped with 24 RGB LEDs, a buzzer and a microphone. The board is supplied with voltage in the range of 3.5 ... 5 V. DFRobot ROB0150
zł84.98
24h
Available quantity: 2
Available
Edge Breakout for micro: bit is an expansion board for the micro: bit module. It offers leaded I / O pins on a 3 x 25 pin gold pin connector. There are available anlog entries, GPIO pins, I2C and SPI interfaces, as well as power pins. Edge Breakout for micro: bit
zł35.09
4 weeks
No product available!
Speaker for micro:bit is an expansion module with a loudspeaker designed for micro:bit with volume control and headphone output. Speaker for micro:bit
zł40.13
24h
Available quantity: 1
Available
Expansion module (outputs expander) dedicated to the micro: bit board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3928
zł193.09
24h
Available quantity: 1
Available
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł188.57
24h
Available quantity: 4
Available
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
zł45.66
24h
Available quantity: 1
Available
Starter kit for IoT projects with micro:bit modules. It contains a micro: bit plate and 7 modules with sensors, executive elements useful in projects related to the Internet of Things. DFRobot KIT0138
zł419.27
24h
Available quantity: 1
Available
SparkFun weather: bit module designed for micro: bit, with temperature, humidity and pressure sensor (BME280 system). In combination with the micro: bit module, it is possible to build a fully functional weather station. SparkFun DEV-15837
zł123.04
24h
Available quantity: 1
Available
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. The set contains all the elements needed to build a weather station. Sparkfun KIT-16274
zł898.98
3 weeks
No product available!
SparkFun micro:bot kit v2.0 - is the perfect controller for learning how to build and program robots. The combination of micro:bit with the SparkFun moto:bot carrier board creates an efficient, cheap robotics platform with Qwiic support for robot enthusiasts of all ages. With SparkFun micro:bot, you can quickly create simple robots. SparkFun kit-16275
zł489.45
24h
Available quantity: 2
Available
The expansion module is designed for micro:bit sets. Offers a simple, beginner-friendly robotics controller. SparkFun DEV-15713
zł421.69
24h
Available quantity: 1
Available
The expansion module is designed for micro:bit board. Controller: bit offers a fully functional controller module with a design based on a classic Nintendo controller. SparkFun DEV-16129
zł88.65
24h
Available quantity: 2
Available
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł73.90
24h
Available quantity: 22
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł97.96
24h
Available quantity: 6
Available
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables. SparkFun KIT-17362
zł321.01
3 weeks
No product available!
The magic:bit expansion module is designed to work with the micro:bit learning board. It can control servos, DC motors, stepper motors, has four RGB LEDs, an IR receiver and a buzzer
Regular pricezł102.83zł70.80
24h
Available quantity: 3
Available
Extension module with environmental sensors designed for micro: bit. Can be programmed with MakeCode or Mind+. DFRobot MBT0034