

The servo controller is equipped with an ESP32 module. It can control the movement of servos with UART interface, eg SC15 or ST3215, and allows you to connect up to 253 drives on one bus. ESP32 provides communication via WiFi or Bluetooth wireless networks in the 5.0 standard, and also supports ESP-NOW, thanks to which the user can easily build a project controlled e.g. by a mobile application. The board has an OLED display and an interface for controlling RGB LEDs.
1. ESP32 | 7. Automatic download circuit |
2. UART servo interface | 8. RGB LED indicator |
3. OLED | 9. DC 5,5x2,1 mm |
4. BOOT | 10. RGB LED interface |
5. Reset | 11. PCB antenna |
6. USB typu C | 12. Serial bus servo controll circuit |
The ESP is programmed via the USB type C connector, and the module is powered with a voltage ranging from 6 to 12 V via a DC 5.5 x 2.1 mm connector. Full documentation is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Programmable standard 17kg * cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare SC15 Servo
No product available!
No product available!
No product available!
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
The servo driver module is an extension intended for minicomputers Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +. Allows you to control 16 PWM channels. Waveshare 15275
No product available!
No product available!
16-channel servo driver module with I2C interface based on the PCA9685 system. modPCA9685
No product available!
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (Adafruit 2327)
The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. You can use a hobby servo in your projects without having to do any programming! WIG-13872
No product available!
This Kit with fully-dedicated PWM driver chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors; you can also connect any other I2C devices or shields to the same pins. This makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. Adafruit 1438
The PCA9685 servo driver module is dedicated to micro: bit educational boards. It allows you to control 16 PWM channels. SB Components 09183
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
No product available!
Advanced servo controller with UART and USB communication, enabling precise control of multiple servos simultaneously. Compact design and stable power supply via screw connector make the device ideal for integration in robots and automation systems with limited space. Cooperation with the Seeed Studio XIAO ecosystem and the use of serial bus instead of traditional PWM provide efficient, scalable and reliable control in educational, research and DIY projects. Seeed Studio 105990190
Servo driver with UART serial interface. Equipped with an ESP32 module with WiFi and Bluetooth wireless communication. Waveshare Servo Driver with ESP32