TB67S279FTG - Pololu stepper motor driver module
ID: 571804
zł61.52
Tax included
zł50.02 tax excl.
TB67S279FTG stepper motor controller module supplied with 10 ... 47V voltage and 1.2A working current. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2974
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
TB67S279FTG Stepper Motor Driver Carrier is a stepper motor driver module based on the Toshiba TB67S279FTG chipset. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step) using DMODE0, DMODE1 and DMODE2. The module is supplied with voltage in the range of 2 ... 5.5 V (logical part), and the motor can be supplied with 10 ... 47 V. The continuous current of the motor should not exceed 1.2 A, and the momentary 2 A. Control room the module is simple and requires only two pions of the microcontroller (direction and step signal). The controller can be used to build a 3D printer or CNC milling machine based on stepper motors.
Attention!
Connecting or disconnecting the stepper motor when the controller is powered can destroy the controller.
An example of a controller connection
properties
- Based on the Toshiba TB67S279FTG chip
- Engine power supply: 10 V to 47 V
- Maximum continuous current per phase without additional cooling: 1.2 A (peak 2 A)
- A simple step and direction control interface
- Seven different step modes: full step, round half-stage, 1/2 degree, 1/4 degree, 1/8 degree, 1/16 degree and 1/32 degree
- Adjustable current control allows you to set the maximum output power using a potentiometer
- Detection of load opening
- Error outputs
- Reverse voltage protection
- Voltage lock and protection against overload / short circuit and overheating
- Built-in regulator (without external logic supply)
- It can work directly with 3.3 V and 5 V systems
- Dimensions: 25.5 x 35.5 mm
- Weight: 4.3 g
Included
- TB67S279FTG Stepper Motor Driver Carrier driver
- 3 x 2-pin screw connector
- 2 x straight male goldpin connector
571804
Data sheet
- Output current
- 1,2 A
- Number of channels
- 2
- Supply voltage min
- 10 V
- Supply voltages max
- 47 V
You might also like
DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. Polol 2133
zł67.33
24h
Available quantity: 2
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł80.12
24h
Available quantity: 4
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2980
zł66.88
24h
Available quantity: 1
Available
TB67S249FTG stepper motor driver module supplied with 10-47V voltage and working current of 1.7A. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2973
zł74.12
24h
Available quantity: 4
Available
Other products in the same category (16)
Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. Pololu 2128
zł89.93
24h
Available quantity: 2
Available
A compact stepper motor controller with the TMC2209 system with an operating voltage from 4.75 to 28 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications. BIGTREETECH TMC2209 V1.3
zł19.90
Delivery date unknown
No product available!
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3762
zł45.61
24h
Available quantity: 2
Available
Module with a stepper motor driver based on the DRV8825 system. allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage up to 45 V. Pololu 2987
zł81.22
24h
Available quantity: 2
Available
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł466.03
24h
Available quantity: 3
Available
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
zł80.07
24h
Available quantity: 1
Available
Dual-channel electric motors controller (H-bridge) Arduino Motor Shield Rev3 with L298 for controlling two DC motors or one stepper motor with the possibility of using an electronic brake.
zł128.01
24h
Available quantity: 1
Available
A4988 Stepper Motor Driver Carrier
zł68.46
24h
Available quantity: 5
Available
Stepper motor driver with MP6500 system with a potentiometer for current regulation. It allows the bipolar motor to be supplied with current up to 1.5A per phase without the use of a heat sink. Pololu 2967
zł41.16
6 weeks
No product available!
STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876
zł36.57
24h
Available quantity: 5
Available
The stepper motor driver with the MP6500 system allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage in the range 4.5 ... 35 V. Pololu 2966
zł36.20
24h
Available quantity: 1
Available
Module with bipolar stepper motor driver TC78H670FTG. It allows you to control the motor with an accuracy of 1/128 of a step with a voltage from 3.6 to 16 V and a current of up to 2 A. SparkFun ROB-16836
zł102.25
24h
Available quantity: 1
Available
Compact stepper motor controller with the TMC2208 system with operating voltage from 4 to 35 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications
zł17.70
24h
Available quantity: 5
Available
A4988 Stepper Motor Driver Carrier with Voltage Regulators
zł38.44
24h
Available quantity: 7
Available
Simple to use stepper motor driver, compatible with anything that can output a digital 0..5V pulse or 0..3.3V pulse. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. ROB-12779
zł87.16
24h
Available quantity: 2
Available
Stepper motor driver based on TB67S249FTG. It allows you to control a stepper motor with voltage from 10 to 47V, with a maximum current of 1.8A. The controller can be controlled using: USB, Serial TTL, I2C, RC (PWM modeling), analog input or quadrature encoder. Pololu 3138
zł351.85
24h
Available quantity: 1
Available
TB67S279FTG stepper motor controller module supplied with 10 ... 47V voltage and 1.2A working current. The controller allows you to control the motor movement up to 7 different resolutions (up to 1/32 of a step). Pololu 2974