Adafruit Feather 32u4 RFM69HCW Packet Radio - compatible with Arduino
ID: 561603
5902186323735
zł147.12
Tax included
zł119.61 tax excl.
Module with ATmega32u4 microcontroller and 900 MHz wireless transceiver. The module can be used for transmission in the ISM 868 MHz band after the appropriate software configuration. The microcontroller is clocked at 8 MHz and works at 3.3 V. Adafruit 3076
Description
Adafruit Feather 32u4 (RFM69HCW) 900MHz is a module with ATmega32u4 microcontroller and 900 MHz wireless transceiver. Networks in this band have a larger range than the 2.4 GHz network (eg 802.15.4), they are very flexible than Bluetooth LE and need less power consumption than Wi-Fi. The module can be used for transmission in the ISM 868 MHz band after the appropriate software configuration. The ATmega32u4 microcontroller is clocked at 8 MHz and operates at 3.3 V. The system has a flash memory with a capacity of 32 KB and a RAM memory with a capacity of 2 KB. Programming is carried out using USB supported in the microcontroller. There is also a 3.7V LiPo connector on the board. The board can be used in the Arduino environment.
properties
- ATmega32u4 @ 8 MHz microcontroller at 3.3 V
- Voltage stabilizer 3.3 V with a current capacity of 500 mA
- Native USB support as a bootloader and serial port
- 20 GPIO pins
- Hardware interface support: UART, I 2 C, SPI
- 7 PWM pins
- 10 analog inputs
- Built-in LiPo battery charger: 100 mA performance and status LED
- General purpose LED
- 4 mounting holes
- Reset button
- The SX1231 radio module
- SPI interface
- Maximum output power: ~ 100 mW
- Power consumption: 50 mA (+13 dBm) / 150 mA (+20 dBm)
- Range: approx. 350 m (depending on obstacles, antenna, and output power)
- The possibility of AES-128 encryption
- Possibility to connect the u.FL connector and antenna
- Dimensions (without connector): 51 x 23 x 8 mm
- Weight: 5.5 g
Included
- Module Adafruit Feather 32u4 RFM69HCW Packet Radio
561603
Data sheet
- Microcontroller
- ATmega32u4
- Flash memory
- 32kB
- Number of I/O
- 20
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 51mm
- Width
- 23 mm
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Easy-to-use retractable cable with USB type A plugs and micro-B type, the cable has a length of 73 cm
zł8.91
24h
Available quantity: 22
Available
Other products in the same category (16)
Module with WiFi Espressif ESP32. It offers 8MB Flash, 2MB PSRAM, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5438
zł102.85
24h
Available quantity: 1
Available
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
zł90.95
24h
Available quantity: 3
Available
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
zł143.34
24h
Available quantity: 3
Available
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591
zł152.38
4 weeks
No product available!
A compact development board with a built-in 1.14" IPS display, ideal for user interfaces, IoT projects, and case-mounted devices. Featuring the ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB, it offers 4MB of Flash and 2MB of PSRAM to support more advanced graphics and networking applications. Three user buttons, a STEMMA QT connector, and an integrated LiPo charger provide convenient prototyping and expansion capabilities. Adafruit 6303
zł125.84
24h
Available quantity: 1
Available
A modern development board in the Feather format, equipped with a dual-core Raspberry Pi RP2350 Cortex M33 microcontroller clocked at 150 MHz and 8 MB of PSRAM, ideal for advanced IoT projects and Micropython/CircuitPython applications. The board offers a wide range of ports, including an HSTX 22-pin connector, USB-C with bootloader, and STEMMA QT, as well as numerous GPIOs and an integrated LiPo battery charger, combining high performance with convenience of use. Adafruit 6130
zł78.54
24h
Available quantity: 1
Available
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
zł183.63
24h
Available quantity: 1
Available
Development kit with SAMD21G18 microcontroller with ARM Cortex M0 core and LoRa RFM95 868/915 MHz radio communication module. Adafruit 3178
zł176.16
24h
Available quantity: 1
Available
Module with ATSAMD21G18 microcontroller and 900 MHz wireless transceiver. The module can be used for transmission in the ISM 868 MHz band after the appropriate software configuration. The ATSAMD21G18 microcontroller (ARM Cortex-M0) is clocked at 48 MHz and operates at 3.3 V. Adafruit 3176
zł147.12
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884
zł79.03
24h
Available quantity: 5
Available
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and BLE communication. Equipped with motion sensors, magnetometer, light, humidity, pressure sensors and a microphone. Adafruit 4516
zł245.41
4 weeks
No product available!
A board with an RP2040 microcontroller and a LoRa RF95 module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and STEMMA QT connector. Ideal for IoT projects. Adafruit 5714
zł175.46
24h
Available quantity: 2
Available
This development board with a microSD slot is ideal for data logging in measurement and IoT projects. Equipped with USB-C, a Li-Po charger, and a STEMMA QT connector, it\'s ideal for portable devices requiring easy expansion with I2C sensors. A powerful RP2040 microcontroller with 8MB of Flash and a rich GPIO set ensures high performance and a wide range of applications. Adafruit 5980
zł75.41
4 weeks
No product available!
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179
zł195.77
24h
Available quantity: 2
Available
Module with WiFi Espressif ESP32-S2. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5000
zł87.88
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much). Adafruit 2796
zł137.85
24h
Available quantity: 1
Available
Module with ATmega32u4 microcontroller and 900 MHz wireless transceiver. The module can be used for transmission in the ISM 868 MHz band after the appropriate software configuration. The microcontroller is clocked at 8 MHz and works at 3.3 V. Adafruit 3076