![UPS Power Module (B) (EU) - Uninterruptible power supply module for Jetson Nano UPS Power Module (B) (EU) - Uninterruptible power supply module for Jetson Nano](https://kamami.pl/45026-large_default/ups-power-module-b-eu-uninterruptible-power-supply-module-for-jetson-nano.jpg)
![UPS Power Module (B) (EU) - Uninterruptible power supply module for Jetson Nano UPS Power Module (B) (EU) - Uninterruptible power supply module for Jetson Nano](https://kamami.pl/45026-large_default/ups-power-module-b-eu-uninterruptible-power-supply-module-for-jetson-nano.jpg)
zł87.68 tax excl.
Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
UPS module for NVIDIA Jetson Nano. After connecting four 18650 batteries, it maintains a stable output voltage of 5 V even after a power loss, which allows the device to continue operating and safely shut down. The battery charge status is indicated by built-in LEDs, and full battery status monitoring is possible thanks to the I2C interface. It is connected to the Jetson Nano via pogo pins. Full documentation is available on the product Wiki page.
Attention!
The kit does not include the 18650 batteries. They must be purchased separately. Batteries with a length of up to 67 mm are suitable for the module.
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
No product available!
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3000 mAh. Samsung INR18650-30Q
Uninterruptible power supply module for Raspberry Pi, which allows you to continue work and safely shut down the microcomputer after a power failure. AC adapter included. Waveshare UPS HAT (B) (EU)
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano
No product available!
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003
No product available!
3.2" IPS LCD Display. It is equipped with an HDMI interface for image display and has a resolution of 480x800 pixels. Waveshare 3.2inch HDMI LCD (H)
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
A set with two OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0266
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
No product available!
A baseboard dedicated to NVIDIA Jetson Xavier NX modules. It offers numerous connectors, including M.2 Key E, M.2 Key M, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-B
No product available!
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 127° angle of view. Waveshare IMX462-127 2MP Starlight Camera
IPS 10.1" LCD display with touch screen. Equipped with HDMI interface for image display and USB for touch screen operation. Resolution 1920x1200 pixels. Waveshare 10.1inch HDMI LCD (G) (with case) (EU)
No product available!
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera
Mini base board dedicated to NVIDIA Jetson Nano modules. It offers basic connectors, including M.2 Key B, 40-pin GPIO, Ethernet, USB, CSI and HDMI output. It has compact dimensions, making it ideal for projects with limited space. Waveshare JETSON NANO MINI (EU)
Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)