• New
Main view
search
  • Main view
ID: 1206961
zł3,719.45
Tax included

zł3,023.94 tax excl.

2-channel Micsig ATO2002 automotive oscilloscope with 200MHz bandwidth, up to 1GSa/s sampling rate and up to 110Mpts acquisition memory. Features a 10.1" 1280 × 800px touchscreen, built-in 7.4V 7500mAh battery, 32GB internal storage, and Wi-Fi, USB and HDMI interfaces. Supports diagnostics of ignition systems, sensors, vehicle electrical systems and automotive communication buses. The Standard Kit includes two P130A 200MHz probes and measurement accessories. Micsig ATO2002 Standard Kit

24h
Available
Available quantity: 1
Kamami is the official distributor of Micsig oscilloscopes and accessories. All products of this brand in our offer are original and come directly from the manufacturer.

Description

The Micsig ATO2002 Standard Kit automotive oscilloscope features 2 analog channels with a bandwidth of 200MHz, a maximum sampling rate of 1GSa/s and an acquisition memory depth of up to 110Mpts. The maximum waveform capture rate reaches 78,000 waveforms/s, enabling the analysis of short-duration disturbances and irregular signals. The instrument is designed for diagnosing vehicle electrical and electronic systems, including charging, starting, ignition, engine control and communication between electronic control units.

The oscilloscope features a 10.1" TFT LCD capacitive touchscreen with a resolution of 1280 × 800px. The Android-based interface and SigtestUI software allow users to adjust measurement parameters, zoom in on waveform sections, operate cursors and perform automatic measurements. The 32GB internal storage is used to save measurement results, screenshots and recordings of completed tests.

The diagnostic software includes measurement procedures for testing 12V and 24V charging systems, starter motors, alternators, ABS sensors, crankshaft and camshaft sensors, fuel injectors, control valves and ignition systems. The diagnostic functions enable the analysis of timing relationships between waveforms acquired on two channels and help identify irregularities in vehicle component operation.

The instrument supports triggering and decoding of UART, CAN, CAN FD, LIN, SPI and I2C buses. Available trigger functions include edge, pulse width, logic, timeout and video triggering. The oscilloscope also provides cursor measurements, FFT analysis, waveform mathematical operations and signal filtering. The time base ranges from 2ns/div to 1ks/div, while the input sensitivity ranges from 1mV/div to 10V/div.

Integrated Wi-Fi, USB and HDMI interfaces support remote operation, data transfer and screen output to an external monitor. The oscilloscope can be operated using PC software and mobile applications, while SCPI command support enables integration into automated measurement systems. The USB ports also allow peripheral devices and storage media to be connected.

Power is supplied by the built-in 7.4V 7500mAh lithium-ion battery or an external power adapter. The 265 × 192 × 50mm enclosure features a folding stand for positioning the instrument on a workbench. The oscilloscope weighs approximately 1.9kg including the battery. The Standard Kit includes two P130A passive probes with 200MHz bandwidth, measurement leads, insulated alligator clips and flexible needle probes for connecting to signals in vehicle electrical systems.

Features

  • Model: ATO2002
  • Type: digital automotive diagnostic oscilloscope
  • Number of analog channels: 2
  • Analog bandwidth: 200MHz
  • Maximum sampling rate: 1GSa/s with one active channel
  • Sampling rate with two active channels: up to 250MSa/s
  • Maximum acquisition memory depth: 110Mpts
  • Maximum waveform capture rate: 78,000 waveforms/s
  • Vertical resolution: 8 bits
  • Input impedance: 1MΩ
  • Input sensitivity range: 1mV/div to 10V/div
  • Time base range: 2ns/div to 1ks/div
  • Input coupling: AC, DC, GND
  • Trigger modes: Auto, Normal, Single
  • Trigger functions: edge, pulse width, logic, Nth edge, runt pulse, slope, timeout, video
  • Bus decoding: UART / RS232 / RS422 / RS485, CAN, CAN FD, LIN, SPI, I2C
  • Analysis functions: automatic measurements, cursors, FFT, mathematical operations, reference waveforms
  • Automotive diagnostic functions: charging and starting systems, sensors, actuators, ignition, communication buses
  • Display: 10.1" TFT LCD
  • Display resolution: 1280 × 800px
  • Touchscreen: capacitive
  • Operating system: Android-based
  • Software: Micsig SigtestUI
  • Internal storage: 32GB
  • Wireless connectivity: Wi-Fi
  • Interfaces: USB 3.0 Host, USB 2.0 Host, USB Type-C, HDMI, trigger output
  • Remote control: PC software, Android and iOS applications
  • SCPI command support
  • Battery power: Li-Ion 7.4V 7500mAh
  • Power adapter: 12V DC / 4A
  • Operating temperature: 0 to 45°C
  • Dimensions: 265 × 192 × 50mm
  • Weight with battery: approximately 1.9kg
  • Kit configuration: Standard Kit
  • Manufacturer: Micsig

Kit includes

  • Micsig ATO2002 automotive oscilloscope - 1 pc.
  • Power adapter with power cable - 1 set
  • P130A 200MHz passive probe - 2 pcs.
  • Insulated alligator clip - 2 pcs.
  • BNC to banana plug measurement cable - 4 pcs.
  • Flexible needle probe - 2 pcs.
  • 7.4V 7500mAh lithium-ion battery - built-in
  • Display protection film - 1 pc.
1206961

Data sheet

Type of oscilloscope
Digital
Bandwidth
200 MHz
Sampling rate
1 GSa/S
Memory depth
110 Mpts
Number of channels
2

Manufacturer

  • BTC Korporacja sp. z o. o.
  • Ludwinowo Zegrzyńskie 52G
  • 05-140 Ludwinowo Zegrzyńskie
  • Poland
  • [email protected]
  • 22 767 36 20

Responsible person

  • BTC Korporacja sp. z o. o.
  • Ludwinowo Zegrzyńskie 52G
  • 05-140 Ludwinowo Zegrzyńskie
  • Poland
  • [email protected]
  • 22 767 36 20

You might also like

Other products in the same category (16)