Best sellers

The module with the IMX230 sensor, working with all versions of the Raspberry Pi. The sensor used has a matrix of 21 MP and allows you to record video at resolutions of 5344x4012/9fps. ArduCAM B0324

MicroMod main module equipped with Bluetooth 5.0 Sparkfun Artemis. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16401

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0200-G

Development board with SAMD21 microcontroller (ARM Cortex® M0+), 22 I / O lines, 12 PWM, UART interfaces, I2C, SPI. The board is equipped with the UBLOX SARA-R410M-02B module enabling the implementation of communication in NB IoT networks. Arduino MKR NB 1500 ABX00019

Sensor for measuring the horizontal wind direction. It has a built-in Hall sensor and allows you to determine one of 16 directions. DFRobot SEN0482

A set of conductive materials dedicated to device prototyping. DFRobot FIT0823

A set for building a walking robot. The chassis is equipped with four servos, a controller and an STM32F030 microcontroller. M5Stack U086

The IO pin expansion module is designed for minicomputers Raspberry Pi 3, Raspberry Pi 4 and Raspberry Pi 400. It contains markings of all inputs and outputs of the minicomputer. DFRobot DFR0828

Universal EEPROM, PROM, NVRAM, SPLD, CPLD, EPLD and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. Xeltek Superpro 610P

Folding solar panel with an output voltage of 5 V and a current capacity of max. 1.5 A. It has the dimensions of 165x105x15 mm (folded) and a USB port

A servo with standard sizes. At 6 V, it can generate a torque of up to 15.5 kg*cm. Additionally equipped with a potentiometer informing about the servo position. It has a standard 3-pin connector matching most popular modeling controllers and an additional servo position pin.

Decoder dedicated to receive digital terrestrial TV programs in the DVB-T2 H.265 standard. Designed for TVs with HDMI, USB, SCART and RF input. BLOW 4625FHD

4-port HUB with USB 2.0 interface designed for use in industry. Closed in a metal housing. Waveshare USB-HUB-4U-LF

32-pin ZIF socket dedicated to DIP packages. It allows for multiple plugging without the risk of damaging the leads. Waveshare DIP 32 Pin ZIF Socket (ARIES Black)

The IO expansion module is designed to work with the micro: bit educational board. There are 19 IO pins on the board, a buzzer and a voltage stabilization circuit are placed. DFRobot MBT0008

HMI module with a 3.5" TFT color LCD display with a resolution of 480x320 px. Equipped with a resistive touch panel. Communication via UART interface. Nextion NX4832T035

Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200

Module with black and white e-Paper display, 3.7" diagonal and 480x280 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-3.7

16 MP camera with USB interface. Equipped with a Sony CMOS IMX298 sensor, a lens with a viewing angle of 60° and a microphone. Dedicated to be used with a computer. ArduCAM B0290

10.1" IPS LCD display with touch panel. Equipped with RGB888 parallel interface for image display and I2C for touch panel operation. Waveshare 10.1inch Capacitive Touch LCD (F)